Jaslar12002

As far as tightening your torsion bars yes it will raise the front but is not recomended because it will ride stiffer and wear out you front end faster

Scott540

I have 35/12.5/R18 pro comp extreme a/t with a 2.5'' in the front and 1'' in the rear the only problem I have is when the wheel is cut the as far as it can go they rub a little. Otherwise everyday driving is no problem, and they look sweet.

MHC-F150

Agreed. 35x12.50-R18.

bonser216

unfortunatly the 35/12.5's won't fit on the stock 275/65/18 rims though right?

humbodtscrew

351250's fit on stock wheels i have seen quite a few of them on here

bonser216

really??? i was looking into tire sizes and a lot of the 12.5's recommend an 8.5 inch rim or bigger and i think the stock ones are 8.. maybe it doesn't matter much.. idk.. not a huge tire guy..

MHC-F150

A lot of people on this forum, as well as others I frequent have them on the stockers.

Can't say that it's recommended, but they fit just fine.

05blackangus

I have BFG 285/65/18's on my stock wheels with no issues at all and a 2" level. I just installed 305/65/18's on some 18X9 Momba wheels with no rubbing at all!!

humbodtscrew

i put a set of 33125018 on a set of stock f150 wheels today at work so there should be no reason why 35125018 shouldnt fit on your wheels