nickpatton_189

iTrader: (2)

There just plug and play, I'm selling kits for our trucks in the trades and sales section of the forum

ursmall

Some of mine

J.Wal

iTrader: (1)

When in traffic the only ones on are the HIDS with projectors. I turn the fogs and 30" bar off.

04f150lariet

it works really good man ive got some under my dash in the front too..

HOLDFAST

here's a few pics of my light set up

05XLT8'

New steps with some LED's.. Let me know what you think.. Back gap guards done, will do front when I get back from Country Concert..

80575

I've been thinking about but I'm not 100% on it yet.

@ J.Wal, I'd hope so lol!

dwo

How did you go about hooking those lights up to the tool box. Mine has holes where the previous owner had a cb antenna hooked up on the edge so I was thinking about just cutting a hole out and adding some brake lights. Did you run an independent line and switch or just tie straight in to the brake wire?

04f150lariet

Well the two on the ends of the tool box are trailer lights, do there are 3 wires, 1 ground (self tapped into tool box) 1 power (goes to brown wire in park lights) and 1 blink wire (which goes to I think green wire in park lights) and then the 3 lights in the middle are just regular running lights with 1 ground wire (again self tapped into tool box) and one positive wire (which I ran all 3 positives from them and ran 1 wire back to my park lights). All lights on the toolbox are tapped into the park of my tails and all the valance lights are tapped into the park lights of my heads. Sorry for the long response but wanted to give you some ideas lol. If you have any other questions don't be afraid to ask

04f150lariet

not an 04-08 nor is it my truck but heres some pics of my closest buds old truck when it fell down a 3 foot hole close to my house, 91 f150