michael williamson

The only antennas I have had any luck with are firestik or Wilson. Any others I have tried have had bad reception. As far as height you need at least a foot above the cab if not a little more. Most of the cables I have seen are all the same and seem to work together. Hope this helps.

I_killdeer2

I like that a lot , do you have your plans? Would you share If you do?

BkoJoe

information i have found about length of ant above cab is 2/3 for best reception, whats your swr match on the dual setup with this truck?

and heres mine, just a single Firestick 2 on the pass side



Gimme props, the Forums sticker is on the right side as well woot!

michael williamson

I wish I made plans but I just kinda winged it as I went. I would be happy to give you measurements and the materials I used for it. Just let me know.

I_killdeer2

That would be awesome! Did you mig weld it?

Hunttman01

coax are universal... as far as i know... and dont buy the cheap cobra 19.... they are garbage

michael williamson

Ya, I just used a little 110 welder I have. Its all cut with a grinder and cut off wheels since I don't have a chop saw either.

I_killdeer2

How did you mount it

michael williamson

It has rails that go under the tool box and there are bolts that go through the box, rails and the bed rails.

Flash!

How tall is that? I'd guess 4' but tough to tell from the angle, could be 5'.

Where is it mounted to?

Looks good!