installed edge!
#31
I broke down and ordered one online yesterday afternoon.
About $280 shipped. I had to pay tax, but that was the best deal I found.
A used one was on eBay, but up to $260 and not done.
Hope it helps my mileage and shifting a bit? And calibrate for my 285s?
About $280 shipped. I had to pay tax, but that was the best deal I found.
A used one was on eBay, but up to $260 and not done.
Hope it helps my mileage and shifting a bit? And calibrate for my 285s?
#32
It's a cool gadget and I like all the info I can display but as far as gaining power I just don't feel it?.
#33
My experience was the mileage got worse but it did help the shifting. I am running level 1 now (shift only). Level 2 (according to many) should give you better mileage but that is not the case for me.
Calibrate will work for the tires but make sure you plug it into your computer and run the update software first. Mine had a older software version and the calibrate would not work until I updated it.
.
#34
Originally Posted by graphite675
Maybe I'm just getting old but I honestly couldn't tell much difference after I put mine in? I tried all 3 stock tunes and just don't notice much except for the little bit harder shift points. I'm surprised at all the people saying it made a huge difference? Maybe if I was drag racing I might notice but as a daily driver it did nothing but make my gas mileage worse in both level 2 and 3? I guess maybe it's because most of the gains are up over 3K rpm which is not something I normally exceed driving around town?
It's a cool gadget and I like all the info I can display but as far as gaining power I just don't feel it?.
#35
Well I got the Edge Evolution mounted and running. There were big problems trying to upgrade it on the PC. Seems the software needs .net to connect.
Would be a lot easier if you just dowloaded the latest file and upgraded it with a PC program that ran directly thru the USB, I hate .net My computer first went to Microsoft to get .net.
I went back to the CD and it hung up trying to load .net? Error message
said "it is taking longer than expected"! Could not re-boot, so I had to turn
off the Power to the PC!
After and hour of this, I got it to run and it said something like no upgrade available! After all that! An instruction note in the box saying I had to upgrade first! There was no picture in the manual how the rubber flap was
hinged on the USB connector, I just had to dig around it with a screwdriver
util I got to the connector. That sucks, could have ripped the whole thing off?
Well we will see what it does. I have in on 1 (transmission) set 1 click firm.
I re-programed for 285 tires.
That's it so far. I will next set the display for mileage (mpg).
Would be a lot easier if you just dowloaded the latest file and upgraded it with a PC program that ran directly thru the USB, I hate .net My computer first went to Microsoft to get .net.
I went back to the CD and it hung up trying to load .net? Error message
said "it is taking longer than expected"! Could not re-boot, so I had to turn
off the Power to the PC!
After and hour of this, I got it to run and it said something like no upgrade available! After all that! An instruction note in the box saying I had to upgrade first! There was no picture in the manual how the rubber flap was
hinged on the USB connector, I just had to dig around it with a screwdriver
util I got to the connector. That sucks, could have ripped the whole thing off?
Well we will see what it does. I have in on 1 (transmission) set 1 click firm.
I re-programed for 285 tires.
That's it so far. I will next set the display for mileage (mpg).
#37
Senior Member
Which edge programmer are y'all talking about ive been looking at getting one but I can't decide cause there are multiple different ones. Is it this one or the edge evo CS?
Last edited by backinblack04; 11-05-2012 at 12:21 PM.
#39
Senior Member
Originally Posted by backinblack04
Which edge programmer are y'all talking about ive been looking at getting one but I can't decide cause there are multiple different ones. Is it this one or the edge evo CS?
#40
Mark
iTrader: (1)
Well I got the Edge Evolution mounted and running. There were big problems trying to upgrade it on the PC. Seems the software needs .net to connect.
Would be a lot easier if you just dowloaded the latest file and upgraded it with a PC program that ran directly thru the USB, I hate .net My computer first went to Microsoft to get .net.
I went back to the CD and it hung up trying to load .net? Error message
said "it is taking longer than expected"! Could not re-boot, so I had to turn
off the Power to the PC!
After and hour of this, I got it to run and it said something like no upgrade available! After all that! An instruction note in the box saying I had to upgrade first! There was no picture in the manual how the rubber flap was
hinged on the USB connector, I just had to dig around it with a screwdriver
util I got to the connector. That sucks, could have ripped the whole thing off?
Well we will see what it does. I have in on 1 (transmission) set 1 click firm.
I re-programed for 285 tires.
That's it so far. I will next set the display for mileage (mpg).
Would be a lot easier if you just dowloaded the latest file and upgraded it with a PC program that ran directly thru the USB, I hate .net My computer first went to Microsoft to get .net.
I went back to the CD and it hung up trying to load .net? Error message
said "it is taking longer than expected"! Could not re-boot, so I had to turn
off the Power to the PC!
After and hour of this, I got it to run and it said something like no upgrade available! After all that! An instruction note in the box saying I had to upgrade first! There was no picture in the manual how the rubber flap was
hinged on the USB connector, I just had to dig around it with a screwdriver
util I got to the connector. That sucks, could have ripped the whole thing off?
Well we will see what it does. I have in on 1 (transmission) set 1 click firm.
I re-programed for 285 tires.
That's it so far. I will next set the display for mileage (mpg).