Ignition cylinder removal help?
Hi all, thanks for reading. I have an 04 new body lariat super crew. I’d been having trouble with it taking multiple tries to start, eventually had trouble turning the key & now it won’t start at all. It seems to me replacing the key cylinder was where to start & I got a rebuild kit. Trouble is my cylinder doesn’t look or act like what I’ve seen online anywhere. There is a hole but it doesn’t do anything or depress a tab. I’d love help figuring out what I’m missing or doing wrong, attaching a pic. Thank you!
https://cimg2.ibsrv.net/gimg/www.f15...2ab28b674.jpeg |
Never messed with one . But me I would have pinned down the electric path first ,we have the drawings . If the key was turning most times then it is a pats problem or a failed path .The pats system tells the pcm to supply a ground to the start relay if its happy > The 12vdc+ path to the start relay goes under the truck to the trans switch so lots to go wrong there .
A test light is all you need to eliminate some things . https://cimg0.ibsrv.net/gimg/www.f15...2263c4cb80.png https://cimg1.ibsrv.net/gimg/www.f15...191f5f6812.png Hope someone can help with this mechanical problem . |
Take a look at the FordTechMakuloco video
Key needs to be in the ON position so you may have to jiggle things a bit to get to the ON position. |
Originally Posted by Jimboy
(Post 7060401)
Take a look at the FordTechMakuloco video
https://www.youtube.com/watch?v=FfmWOjTaUTc Key needs to be in the ON position so you may have to jiggle things a bit to get to the ON position. thanks but, again, this isn’t what’s in my truck. Totally different and this video is the body style before mine. |
Thanks all but we got it. It took a shorter person to be able to get underneath to see better, and another person to twist & pull on the cylinder to line it up right.
thanks again |
Glad you got the cly in . Does it start now ? Did you replace both the mechanical and the electrical switch . Or was it a linkage problem .
|
Originally Posted by redfishtd
(Post 7060761)
Glad you got the cly in . Does it start now ? Did you replace both the mechanical and the electrical switch . Or was it a linkage problem .
no, I only got the old one out so far. |
All times are GMT -4. The time now is 01:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands