How to Install Lariat Cluster and Get the Info Center to Work
02-15-2014, 04:56 PM
#25
Senior Member
Is it necessary to hook up the AUTO CLIMATE in order to do the info center upgrade, or is it optional? I have a friend that has a DSP III to program what I want if I get a Lariat cluster to install. I also have the dash pieces ready to on ebay (picture below) if i decide to pull the trigger on everything.... I would like to do the AC upgrade but I'm reluctant because of all of the splicing involved....
02-15-2014, 05:44 PM
#26
BAMF Club
You can do the info center separate from the climate control
The following users liked this post:
Inkdot22 (02-15-2014)
02-22-2014, 01:36 AM
#27
Senior Member
of
The Info center buttons have 4 wires:
VIO/WHT- this connects to C220B pin 1 on the cluster
GRY/ORG- Connects to C220B pin 10 on the cluster
LTBLU/Red- This is the Illumination Pick up I connected this to LTBLU/RED on
the climate control
BK- This is ground for the Illumination I connected this to BLK/LT BLU on the
climate control since I was also running the previous wire there but you
can find a ground almost anywhere.
You do not have to attach the LtBlu/Red and BK wires at all to make this work.
The Info center buttons have 4 wires:
VIO/WHT- this connects to C220B pin 1 on the cluster
GRY/ORG- Connects to C220B pin 10 on the cluster
LTBLU/Red- This is the Illumination Pick up I connected this to LTBLU/RED on
the climate control
BK- This is ground for the Illumination I connected this to BLK/LT BLU on the
climate control since I was also running the previous wire there but you
can find a ground almost anywhere.
You do not have to attach the LtBlu/Red and BK wires at all to make this work.
