Mardybum

Ok gents,

I just installed my Alpine CDA-105 headunit and everything worked great....when I was in PARK. As soon as I put it in gear and started driving.. the unit would stop working...? Wuts the deal? Help! Please!!!

Thanks

GATORB8

Did it start working again when you put it back in park? I'm guessing that you've got a loose connection, maybe a butt connector came loose if you didn't solder. Nothing in the stock harness should turn off in drive.

Mardybum

Yes it continues to work in PARK....I guess I'll have to check on it tomorrow morning because I have to go into work this evening...sux so much...Your right I didn't solder, so if it continues to mess up, I'll let you know. Thx

David

GATORB8

You know, I wonder if it's got something to do with the Vehicle Speed Sensor wire. Check the grey/black wire from the factory harness when you pull it out.

Mardybum

Well I popped open the dash this morning, took out the harness, checked the connections and re-grounded everything....and still having the same problem.

@GatorB8... I don't think it would have anything to do with the Speed Sensor Wire considering I had no problems before with my factory stereo. My question to you is...and i know there probably is...but, Is there a picture/diagram I can see to let me know if I even put all the connections in the right spot anyways?????

Thanks again,

David

GATORB8

I meant on the aftermarket side of the harness for the speed sensor, it should be the only thing affected by the transmission in the radio harness.

Spyder31

This should do the trick...just did a google search and found this stuff:

http://www.google.com/images?hl=en&c...iw=919&bih=409

Mardybum

Well I succumbed to the power of Geek Squad....

payed $50 and nuff said.....sorry to not impress... haha

Thanks anyways guys....


David