Help!!! Hesitation Problems 2007 F150
#1
Help!!! Hesitation Problems 2007 F150
Hey guys,
I'm new to this forum so I hope I'm posting this in the right section. So let me give you all a run down on my truck and see if anyone out there can help me. I should also inform you that I don't know much about the mechanic part of things which is why I need help. I feel sometimes I'm being fed a line of BS but I don't know it. I purchased my 2007 F150 King Ranch 2wd in March of 2015. 2 weeks later I blew the motor on the interstate. Apparently the oil pump broke and blew the motor. I didn't have any indication that this was going on. No changes in performance or control panel lights coming on. The motor was rebuilt along with a new valve body on the transmission and a lower arm bracket. Ever since I got the truck back it has had hesitation issues. My mechanic first said they were getting a "ROM fail code" which he claimed the computer needed to be replaced. So my computer was replace and still have a slight hesitation problem. 2 weeks later my truck started to throw itself into "engine fail-safe mode" I took it back to the shop and they claimed that one of the wire harnesses brackets broke and was being burnt by the exhaust manifold. So they replaced the wiring and told me that was probably the hesitation problem the whole time. So I get the truck back and still has the hesitation but now the engine fail safe mode isn't coming on so I believe that is fixed. I took it back to the shop and complained so they said they were going to change my plugs, clean my MAF sensor, clean my throttle body and replace my computer again because it was throwing another "ROM" code. So here we are again all of this has been done and I'm still having hesitation but now its slightly worse or present more. I called the shop to complain again and they informed me that they put in AUTOLITE plugs. I have read on here mixed things about these plugs and that it is best to use Motorcraft. I have been reading the forums on here for the last couple month trying to get an idea of whats going on with my truck. The only thing I haven't done that I have seen on here related to hesitation problems is change the fuel filter. I did call the mechanic and they are taking it back and putting the motorcraft plugs in. What else could it be. All I have done since I purchased this truck is try to figure out while it does drive the same as when I bought it. Please Help. Thanks guys!!
I'm new to this forum so I hope I'm posting this in the right section. So let me give you all a run down on my truck and see if anyone out there can help me. I should also inform you that I don't know much about the mechanic part of things which is why I need help. I feel sometimes I'm being fed a line of BS but I don't know it. I purchased my 2007 F150 King Ranch 2wd in March of 2015. 2 weeks later I blew the motor on the interstate. Apparently the oil pump broke and blew the motor. I didn't have any indication that this was going on. No changes in performance or control panel lights coming on. The motor was rebuilt along with a new valve body on the transmission and a lower arm bracket. Ever since I got the truck back it has had hesitation issues. My mechanic first said they were getting a "ROM fail code" which he claimed the computer needed to be replaced. So my computer was replace and still have a slight hesitation problem. 2 weeks later my truck started to throw itself into "engine fail-safe mode" I took it back to the shop and they claimed that one of the wire harnesses brackets broke and was being burnt by the exhaust manifold. So they replaced the wiring and told me that was probably the hesitation problem the whole time. So I get the truck back and still has the hesitation but now the engine fail safe mode isn't coming on so I believe that is fixed. I took it back to the shop and complained so they said they were going to change my plugs, clean my MAF sensor, clean my throttle body and replace my computer again because it was throwing another "ROM" code. So here we are again all of this has been done and I'm still having hesitation but now its slightly worse or present more. I called the shop to complain again and they informed me that they put in AUTOLITE plugs. I have read on here mixed things about these plugs and that it is best to use Motorcraft. I have been reading the forums on here for the last couple month trying to get an idea of whats going on with my truck. The only thing I haven't done that I have seen on here related to hesitation problems is change the fuel filter. I did call the mechanic and they are taking it back and putting the motorcraft plugs in. What else could it be. All I have done since I purchased this truck is try to figure out while it does drive the same as when I bought it. Please Help. Thanks guys!!
The following users liked this post:
ScottKing_07 (09-15-2015)
#5
Alright so I got it back from the shop and it runs exceptionally better. Then changed the plugs from autolite to motorcraft. Now the hesitation isn't as bad but it's still there. When the truck is cold it runs amazing but if you give it like 45 mins of consistent running and it starts the hesitation.
#6
Help plz
I have a 2007 f150 lariat with a 5.4 3v and it's going into a engine failure safe mode and it's not throwing any codes I can only go a few miles down the road and itll just completely shut down and it will not crank back up unless i remove the battery terminal for a few seconds then put them on and itll crank up I need help I'm completely dumb founded
Trending Topics
#8
Mark
iTrader: (1)
Alright so I got it back from the shop and it runs exceptionally better. Then changed the plugs from autolite to motorcraft. Now the hesitation isn't as bad but it's still there. When the truck is cold it runs amazing but if you give it like 45 mins of consistent running and it starts the hesitation.
#9
Mark
iTrader: (1)
#10
I think he meant the initial thread was started in 2015...
Bill
Bill