Finally done with bodylift and ptm bumpers
#11
Looks good
#13
Looks real good and I know what you mean about throwing wrenches and cuss words lol I literally just finished my body lift also and what a project it was!! I understand why shops were asking for 900 plus to install them! Truck looks BA!
#14
Senior Member
Thread Starter
..
#16
Senior Member
Thread Starter
Yes it lifted the bumpers up also .... it was a pain to try and get them lined up but it was my fault in the end... I had to replace some bolts and they made it difficult to get the angle back after the bumper lift brackets.. im also working on a way to reinstall the factory tow hooks back in there original locations somehow and not below the valance.... all in all other than my truck being originally from New York and all the bolts being somewhat rusted it was a fairly easy installation the directions pin point everything to a T to DIY
#18
Senior Member
Thread Starter
#19
Originally Posted by bigdeck87
thanks I wound up grinding all bed bolts out if it, busted 4 torx bits, and after being finished I tried putting the fuel filler extension hose on after bolting the bed back down and had to undo it luckily my wife is little and could squeeze between tire to reinstall the hose.... THE ONE TIME I FOLLOW DIRECTIONS I had to redo numerous things... I am happy with the end results though so not complaining about It to much.! There were alot of steps that the directions went overboard with I thought... it was worth maybe 400 for all the work if a shop done it due to them having access to lifts, torches, etc... after doing one it is possible to do one yourself no point in paying that amount to do one... thanks
..
..
#20
Originally Posted by bigdeck87
Yes it lifted the bumpers up also .... it was a pain to try and get them lined up but it was my fault in the end... I had to replace some bolts and they made it difficult to get the angle back after the bumper lift brackets.. im also working on a way to reinstall the factory tow hooks back in there original locations somehow and not below the valance.... all in all other than my truck being originally from New York and all the bolts being somewhat rusted it was a fairly easy installation the directions pin point everything to a T to DIY