Does anyone else run level 3 tune with adjusted settings? I am looking to try something with mine. All I did on mine so far was lightly adjusted shift points and firmness.

 

I don't know if it makes a difference but I have an 02 with the 5.4. When I try and mess with the timing (1.5) and wot fuel (1.3) my truck bounces rpms at idle. Going from 658-1075. Any ideas???

This is the tune I tried running:

Performance Tune (Level 3) 93 Octane Only
WOT Shift: 1st-2nd 5300; 2nd-3rd 5300; 3rd-4th 5000
WOT Fuel: 1.3
Timeing: 1.5
Shift Firmness: 18-all
Rev Limiter: 5450
Tire Size: 2792mm
Gear 3.55

Now my options dont include the torque converter and my wot fuel only goes up to 1.3... also i tried lowering the timeing -.25 and each time in bounced rpms at idle until my timeing was at 0.0 and my WOT fuel was untouched. I have no ideas whats going on.. my new tune is as follows:

Performance Tune (Level 3) 93 Octane Only
WOT Shift: 1st-2nd 5300; 2nd-3rd 5300; 3rd-4th 5000
WOT Fuel: 1.2
Timeing: 0.0
Shift Firmness: 18- all
Rev Limiter: 5450
Tire Size: 2792mm
Gear 3.55

 

I have the same problem with the tire size. It seems to go back to the default size when I change settings.

 

...then read this!

http://www.f150online.com/forums/chips-tuners-programming/424841-using-monochrome-edge-evolution-gryphon-custom-options-menu.html

should help you...

Oh. Speed limiter set to 200! Seriously?

 

Thanks,

Oh, And yeah why not? lol

 

Just set it the first time messing around learning to use it and from then on just set load previous setting. I was actually adding that info to see if it was a know issue setting that causing the problem.

 

Creating this post as a stickey would be a good idea, as many agree that a tuner is one if not the best method to wake up an engine, but it would need to be cleaned up. I would think that as a sticky it should have suggested/proven tunes, and less comments/suggestions on "leaving it alone" and the such.

I'll keep an eye on this post. If you want it to be a sticky, I'd delete the posts that do not offer suggested tune parameters. However, I do not want anyone offended that their posts got deleted.

 

Maybe we should have two then? One for settings and one for questions?

 

Feel free to edit out all the nonsense. I think having it listed with just settings and results, no discussion or b.s., would be a great sticky

 

I can do that with SKULL#!'s permission. He's the original poster of this thread.

We want stickys to be for information only posts; no questions, etc. Two posts are fine, but if a question gets asked within a sticky, we delete it and ask the person to post as a "normal" post in the correct forum. This way the stickys stay clean and easy to navigate through.