Edge Evo Fusion Help Needed
#1
Edge Evo Fusion Help Needed
I've had my Edge Evolution for a few months now, but just recently decided that I want to try updating it.
After finding a USB cable that would work, I downloaded Fusion from Edge and gave it a try.
The first couple of times I plugged in the Evo, the computer recognized that a device had been plugged in and pulled up the wizard installer. Never got past where it says "connect device to launch..."
So I removed Fusion and re-downloaded it and now my computer won't even find the Evo when I plug it in!
It makes the beeping sound saying that something is plugged in, but then nothing happens.
Any help would be appreciated!
After finding a USB cable that would work, I downloaded Fusion from Edge and gave it a try.
The first couple of times I plugged in the Evo, the computer recognized that a device had been plugged in and pulled up the wizard installer. Never got past where it says "connect device to launch..."
So I removed Fusion and re-downloaded it and now my computer won't even find the Evo when I plug it in!
It makes the beeping sound saying that something is plugged in, but then nothing happens.
Any help would be appreciated!
#5
Not too sure how to set the program to run as under a different setting either. Looked around a little but don't have too much time to mess with it now.
#6
Senior Member
Join Date: Dec 2012
Location: In way too hot southern Georgia
Posts: 1,454
Received 272 Likes
on
201 Posts
look at this site. It has directions on how to set up virtual XP machine. I had the same issue and when I set up on virtual XP, runs fine.
https://windowssecrets.com/top-story...-step-by-step/
otherwise I suggest contaction Edge tech support.
https://windowssecrets.com/top-story...-step-by-step/
otherwise I suggest contaction Edge tech support.