Cleaning the Throttle Body
#1
Senior Member
Thread Starter
Cleaning the Throttle Body
Here is before pictures of my 2006 F150 5.4L throttle body. The truck has 194k on it.
Let's see how clean I can get it!
Let's see how clean I can get it!
The following users liked this post:
berty (06-21-2016)
#2
Beer, Boats, and Trucks.
I'll be doing mine soon! Lets see how clean you can get it!
#4
Beer, Boats, and Trucks.
Not bad! What'd you end up using? I've got carb/intake cleaner and QD electronic cleaner for the MAF, not sure which is best to use here.
#5
Senior Member
#6
Beer, Boats, and Trucks.
Ah you know what, I think I asked that before on here and got the exact answer... lol that's how long it has been for me to actually get this done
#7
CRC TB cleaner, helps preserve the factory coating commonly used on Ford TB's. Soft toothbrush works well
Trending Topics
#8
Senior Member
Thread Starter
Then while it was off I went ahead and cleaned the MAF sensor too.
Both worked really well!
#9
Beer, Boats, and Trucks.
Awesome, I'll be grabbing a can of both! Thanks!
#10
Senior Member
Thread Starter
I just took it for a test drive and wow!
I noticed more power. The idle is now higher, was around 500, now 700. The rough idle that I had, is almost all gone!! I wouldnt have thought that was all due to the TB and MAF!!
I noticed more power. The idle is now higher, was around 500, now 700. The rough idle that I had, is almost all gone!! I wouldnt have thought that was all due to the TB and MAF!!
The following users liked this post:
berty (06-21-2016)