changing plugs in 4.6 should i replace COP's to?
05-28-2010, 10:21 AM
#11
so i changed the plugs today and everything went good. i used motorcraft platinum plugs which were already in there but i dont know if they had been changed before. but i didnt mess up any of the boots and toqured them down to 13 ft. lbs. took me about 2 hours to do.
05-28-2010, 12:36 PM
#12
Junior Member
Thread Starter
Join Date: May 2010
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
yeah it was really easy i just went one at a time and started on the drivers side. i only removed the intake and the little bracket on the drivers side the hold the power steering reservoir. the pass side was a little tight but i managed with out removing anything but the hose that goes to the PCV valve. tools needed are a variety of extensions 7mm, 8mm, 5/8 spark plug socket, torque wrench, and a few other little things. and most important dont forget to blow the holes out before taking the old plugs out!