Broken Headlight Tab
#1
Senior Member
Thread Starter
Broken Headlight Tab
So you know that little tab on the back of the headlight with the metal clip looking thing that slides into a slit on the truck when you push the headlight in? Mine broke.. Now my headlight constantly moves and knocks my headlight out of alignment so I'm either blinding people or staring at the ground immediately in front of me. Does anyone have any ideas on how to fix this? I honestly can't think of anything.
#2
Senior Member
When it happened to me, I superglued it back together. Worked until the next time I pulled the headlight out. Then I would glue it again. That and make sure the bolts are nice and tight. Helps with the movement.
#3
workin for parts!!!
The other 2 bolts arent enough to hold it secure?..maybe some wire and a drill..drill a small hole somewhere on the back side of the light on one of the "ribs" and wire it back securely.
#4
Senior Member
Thread Starter
Nono. It's the other thing near the bottom of the headlight. It's a flat piece of plastic with a metal clip around it that holds the bottom portion of the still. I'll try and get a picture of my other headlights clip
Trending Topics
#8
workin for parts!!!
Make the hole the same size as the wire and drill the hole near the back of the nub..towards the housing to give as much "meat" in front of the wire as possible..Kinda Redneck..but just may work
#9
Senior Member
Thread Starter
I was gonna order new headlights off of eBay so I could swap out my ****ty lenses for the new ones cause I hate having fancy retrofitted lights with scratched up lenses. I guess I'll just swap everything over to one of the new housings when I get them but this should work for the mean time. Thanks man!
#10
Broken Headlight tab
Could you post a pic, as I'm totally lost on what yous are talking about! Skip it pic didn't load the first time!!!
Last edited by ddc; 07-02-2014 at 04:43 AM. Reason: glitch!