blowing fuse 102
08-01-2016, 08:08 AM
#1
Junior Member
Thread Starter
Join Date: Aug 2016
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
blowing fuse 102
I recently had the fly wheel and starter changed on my 05 xlt with the 5.4. when I went to pick it up the ignition switch fuse 102 blew twice. the mechanic said to come back. a few hours later he called me to come pick it back up. now I since then I have lost all but the highest setting on my blower fan(heater/ac) my 4x4 wont work( no-light or anything) and I got a check engine light with an obd code of p2227. then all of a sudden the fuse 102 started to blow again. He said change the starter again which I did myself due the truck not being able to move out of my driveway. It seemed this fixed the problem of it starting at least for a few days. this morning I went out and it started blowing fuses again, after pulling the blower fuse, trailer brake assist, 4x4 relay, and I believe the 107 fuses to replace 102 it finally cranks. I know he removed some wiring harnesses and an O2 sensor when he had to drop the transmission to change the flywheel could it be pinched wire or something.
08-01-2016, 08:26 AM
#2
Mark
iTrader: (1)
Why are you trying to fix something he should be fixing... take it back to him.. make him come get it !
08-01-2016, 08:39 AM
#3
Junior Member
Thread Starter
Join Date: Aug 2016
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
yeah I am out of repair money now that, I have spent almost a 1000 on this issue and just spent over 2300 to have the front end replaced and new struts and shocks. so I want to ensure it is something he is responsible for.
08-01-2016, 08:54 AM
#4
Mark
iTrader: (1)
It didn't do it before he worked on it.. correct ?
08-01-2016, 09:27 AM
#7
Mark
iTrader: (1)
don't think so...
Trending Topics
08-01-2016, 09:34 AM
#8
Moderator
If it didn't do it before he worked on it I'd be making him fix it!
The following users liked this post:
techrep (08-01-2016)
08-01-2016, 11:00 AM
#9
Junior Member
Thread Starter
Join Date: Aug 2016
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
looking over the schematic, it looks like it could be a few things but one that would connect the starting issue and 4wd would be the dtr. anyone have any experience with the dtr blowing fuses or should I start with ignition switch and work out to the starter relay?
08-01-2016, 11:03 AM
#10
Mark
iTrader: (1)
what is dtr..