Ball joints/ lower control arms
06-07-2017, 07:27 PM
#1
Junior Member
Thread Starter
Join Date: Jun 2017
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Ball joints/ lower control arms
Im about to put a rough country 6in lift on my truck, and im going to replace the ball joints and lower control arms at the same time. Im just wondering what brand to go with for those, that best runs with the rough country lift. thanks in advance!
06-07-2017, 10:55 PM
#2
Senior Member
I used Moog. Cant say much about them yet as I just installed this past week. I still have the uppers to do. I did the lowers and the tie rod ends.
You may want to check your tie rods as well while your at it.
You may want to check your tie rods as well while your at it.
06-08-2017, 06:23 AM
#3
Mark
iTrader: (1)
Moog
06-08-2017, 09:07 AM
#4
Senior Member
I used all Moog parts on my front end two summers ago. Everything is great.
Just make sure you give them a pump of grease every oil change. Don't use seriviable parts if you don't plan on servicing them.
Just make sure you give them a pump of grease every oil change. Don't use seriviable parts if you don't plan on servicing them.
06-08-2017, 04:35 PM
#5
Mark
iTrader: (1)
^^^ This ^^^
06-09-2017, 01:01 PM
#7
Junior Member
Thread Starter
Join Date: Jun 2017
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
06-09-2017, 04:43 PM
#8
Mark
iTrader: (1)
So ... you going with Moog ?
06-12-2017, 05:16 AM
#10
Mark
iTrader: (1)
Another satisfied customer..
