Belt skip when shifting from 2nd to 3rd
#1
Senior Member
Thread Starter
Belt skip when shifting from 2nd to 3rd
Edge Evo Performance setting.
Under extreme acceleration...
I can hear a squeak that sounds like the belt is losing traction.
Would the best fix for this be underdrive pulleys?
Under extreme acceleration...
I can hear a squeak that sounds like the belt is losing traction.
Would the best fix for this be underdrive pulleys?
#3
Notorious Thread Editor
This is very common with performance settings when they get over or close to 5k. Some use a gator belt to fix. Underdrive pulleys might, but the gatorback belt is a much cheaper start.
#4
Senior Member
Thread Starter
Thanks I'll try that, if still squeak then go with pulleys. I plan on doing pulleys someday but so many mods, so little money.....
#5
Notorious Thread Editor
#7
Senior Member
Thread Starter
But but but. Thats 200 RPM.... Ok. So it's option #2. Gatorback going on this weekend. If that don't take care of it I'll adjust the shift points...
Trending Topics
#8
I get the same belt skip even with the gatorback and i probably only have about 5000 miles on it. I just deal with it i dont floor it all the time. If i had a problem with it i would just change the shift points like f150mashin559 is talking about. But with the factory belt it was the 1-2 and the 2-3 for me.
#9
Senior Member
Join Date: Dec 2008
Location: san jose, ca
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
well at WOT my truck still shifts into 2nd gear at like 50 so what do u need that xtra 200 RPM for? its just cheaper and you dont have to deal with the installation of the belt.