after killing my arms/hands getting the rear seat back out to get the numbers off the module, the 59506 does not open the door. 7/8 and 9/0 lock the door and the pad lights up when touched. am i missing something? (new owner of used truck, no owners manual, the usual drill) i had to go through s similar ritual with my 2002 lariat but i am not so lucky with the 2004 super crew xlt. i have searched and have done too much work to go to the dealership and get plugged in at this point. help

 

try the 15604 number
that's the only other thing I can think of

 

well i have a little info on this my truck did not come wit a key pad, but i wanted the factory on it looks cleaner then the stick on ones. so i installed it and i had to get it turn on. well before i did that i pulled the back seat and did wat u did. but it was the wrong code longstore short they had to make a code and lose that code on the box. so wat i am saying if that truck did not come wit one stock u just need to take it to a dealer and ur be good it might cost 20 i got my programd for like 30 dollars

 

I had the same issue, 4x4 wasn't engaging and took it to the dealership. Needed a new transfer case motor, $400 bucks later from the dealership...4x4 works perfect!

 

how on earth is that remotely close?

 

made trip to dealership, had a pats key made so i would have a pair and part of the deal was to retrieve the code. but alas they could not pull it out....said their software would not do it. now what? are these BSM's plug and play? will any BSM 04-08 work?

 

tell them to call family ford in carlisle pa that is where i got mine done they will tell them how to get it it is a long prosses my friend that is a ford teck said that it is a pain in the *** they like have to reboot the keyless entry modual hope that helps

 

LMAO!!!! i just need a good laugh tonight... LOL