98FordF150

Hey Guys I did search but came up empty. What r u guys doing for built in subwoofers? I want a lil bump in the truck. I was thinking either just a single ten or maybe two. But one is enough for what I want to do. Any ideas and where I can buy the box? Or get the dimensions to build it?

scobar

iTrader: (4)

I built a box and put in a pair of RE Audio REXD48's. I used a program called tourres Box Tuning Calculator to come up with the dimms. It fits under the seat and subs fire up. Used a pac factory integration loc and using stock deck.

Off the top of my head:
Back height 5"
Front height 7.5
Length 56"
Depth 13"

I modified the instructions and used 2 baffles inside and created a center chamber to place some poly fill and left the ends open. It is a common chamber enclosure. Then covered with herculiner. Does not slide either.

A single kicker cvt 10 will have enough air space to go ported under the rear seat.

I just realized I posted in the 2004-2008 sub-forum, dimms above are for '11 screw. In the scab I am in the process of building a box to told a 12" type r in a ported box under the seat.

If you are in MN and want to swing by, I have a box for 10's you can have. Will need to be glued together at the seams and need speaker jacks.