6" Lift w/ 33's
#1
Member
Thread Starter
6" Lift w/ 33's
I've seen a few trucks with this setup, but I'd like to see some more. I'm in the in-between stage of lifting and needing tires. I'll also want to re-gear with 35's (4.6L) so that's also a factor for running 33's. Post some pics of any 6" lifts with 33" tires!!
#2
Mark
iTrader: (1)
Tires will look small with a 6"... Better with a 4"
#3
Senior Member
I'm kind of in the same boat. I have 33s on a 2 1/2" level. I want a 6" inch lift and 35s. I know I have to do a gear change (4:56) but I don't have the funds to do it all at the same time. I'm thinking about doing the gear change first. Can't decide if I want to do tires next or lift. I think I'll be ok with 35s with my level temporarily.
#5
Sh!tllbuffout
Have you checked out custom offsets website? You can filter out anything you want.
Edit- sorry. I cant seem to be able to post a linky.
Edit- sorry. I cant seem to be able to post a linky.
Last edited by Heavy_Metal; 07-10-2018 at 02:42 PM.
#6
Renaissance Honky
What gears are you going to use with the 35's and 4.6?
#7
Mark
iTrader: (1)
Trending Topics
#9
Renaissance Honky
Generally, you're not wrong.
I haven't done the math on that combo, I'd probably lean towards the 4.56 with a 5.4. With the 4.6, you might want to go for the 4.88's. You're trying to keep good piston velocities with your vehicle speed...
I haven't done the math on that combo, I'd probably lean towards the 4.56 with a 5.4. With the 4.6, you might want to go for the 4.88's. You're trying to keep good piston velocities with your vehicle speed...
#10
Member
Thread Starter
Can you point me to some literature/articles/websites where I can learn about piston velocity and/or how to calculate what the right ratio for a 4.6L would be?