6" lift with level
#1
Junior Member
Thread Starter
6" lift with level
ok here goes just did a 2.5 hbs on my 04 like the look of the truck but now Iam looking to do a 6" suspension lift have it my mind up on the one I like zone or fabtech I am going with 35 or 37 what I need to know is I can keep the 2.5 level kit with the lift that would give me 8.5 of lift if it can be done. would be nice to see some pic done that way.the wheels Iam looking to do are mo909 with fierce 325/65/18.got a good deal on them 2190 fo all 4
#5
Senior Member
You most likely will NOT be able to put a 2.5" level on a Zone lift. It is the same as RCX in that it does not drop the cross members down a full 6". Ive only heard of some people doing a 1" daystar in top of a 6" zone and even then their CVs look terrible and they had problems with the control arm hitting the coil spring on bumps.
With a Fabtech, you absolutely CAN use your 2.5" level no problem. Your CVs will be at a steeper angle and still not great but definitely doable. There are a few guys on F150online that have done this and ran it for 4+yrs without a problem.
With a Fabtech, you absolutely CAN use your 2.5" level no problem. Your CVs will be at a steeper angle and still not great but definitely doable. There are a few guys on F150online that have done this and ran it for 4+yrs without a problem.
Trending Topics
#8
Senior Member