Bigbucks243

I was just wondering does anyone make a 3 inch suspension lift kit for these model trucks?

Tprimo15

I'm pretty sure the smallest they make is a 4inch suspension lift. You can't get a 3 inch leveling kit bit puts cv joins at a not so good Angle and wears out ball joints quicker.

ursmall

Do a 3" level and aal had a 3" level on my from almost new no problems 110k still have stock ball joints and running 9" lift now all stock front

It goes off roading ones a month no problems been about 100k with 35s and a level


I think skyjacker makes a 3" lift kit from what iv seen on here

04whitefx4

I did pretty much the same set up as ursmall but I pulled out the oem block in the back out and put a 5 inch block instade of an add a leaf

Tprimo15

The only regret I have with the rough county lift is I can only add max of 1.5 inch spacer. I wish I could do the 3

ursmall

I was going to do that but i knew i was going to go bigger so i did the aal

XLT Billy

Skyjacker makes a 3" coilover lift kit. You can find it on autoanything.com

http://www.autoanything.com/suspensi...A5964A0A0.aspx

Bigbucks243

Yeah I was look at it earlier but what exactly is a coil over kit?

04whitefx4

[QUOTE=ursmall;1631736]I was going to do that but i knew i was going to go bigger so i did the aal[/QUOTE
I want to go a little bit bigger but if I do it with tiers ill go from a 325/60/r18 to a 295/70/r18

Bshipe22

I just looked this one up... Now since I have 3" level. Does this replace that or add to it? I'm kinda been lookin at susp lifts to get a better ride back than the stiff level