GALariat

Has anyone put a 3" level and a 1" block on a 2wd? Just wondering if the 3" level lead to any problems? I'd like to get as much height as possible without breaking the bank or breaking parts. Any input would be much appreciated.
Mitch

HarrisRacing17

I didn't on my 06 screw because its 4x4 but on my 2000 Scab 2wd I did a 3 inch front level and 3 inch rear blocks and it sat beautiful

GALariat

Did the 2000 model come with factory blocks on the rear? correct me if im wrong but the 2004-2008 doesn't come with rear blocks so the 1" block should bring the back up an inch.?

ewood39

I have an 05 2wd and it's got a block in there under the leaf spring

05RedXLT

i did this. I did a 3" spacer up front and an OEM 4x4 block in the rear. No problems at all. I was very specific with my alignment even did an alignment kit so it was dead on. I have a slight rake, but all is fine.
I can get you pics if you need

o and i am 2wd

GALariat

Pics would be great, and also where did you get the OEM block?

HarrisRacing17

there were no blocks in the back of my truck at all. just axle to leafs

05RedXLT

here you go