Chrisajcs

I replaced the OEM Keyless pad after stumbling upon the 7/8 and 9/0 buttons not causing the door pad to light up. I bought a new OEM door pad from Ford's Ebay site for ~65$. Installed it and started checking the buttons. 7/8 and 9/0 still did not work. After checking some stuff out on here i went back out to do some more diagnosing and now none of the buttons cause the pad to light up. I am at a loss and have no clue where to start. Checked the Fuses (6,22,and 107?) were fine. I have pulled the rear seat and checked the code and i do have the correct code off the Control Module.

Any idea where to go from here?

Thanks,
Chris Cummings

BadFish523

Not being a smart *** but you checking it at night? I could be wrong but it seems like mine only light up at night. Same system as the auto lights.

Chrisajcs

Na, that's a good point. Yeah, I had installed the keypad at night in my poorly lit garage and when i unlocked the truck with my key fob the headlights kicked on which doesn't happen during the day when the DRL is functioning.

TOPGLOCK

Pull back the black boot in the door jam. These trucks are known to have broken wires there that can cause the symptoms you're describing.