2005 4x4 pops out under accelaration front driveshaft stops spinning
#12
I would replace the iwe solenoid I just got mine back from the dealer I woulda did the work myself but is still under warranty my truck started popping out of 4x4 then I ground out the teeth so bad on the drivers side iwe it would engage but would just grind the thing that happens to the solenoid is water would drain on it short it out and get water in the vacume lines
#13
hi Ryan, i dont see how the iwe solenoid would allow it to have 4 wheel in reverse but not in forward unless i am missing something. i am thinking possibly shift fork. Thanks for your reply
#18
Junior Member
My 06 has this problem also. I have tried everything except replacing the t/c. You can remove the t/c motor and manually select 4hi by turning the selector shaft on the t/c. This didn't help me any. Still have the problem. I have found a few t/c locally so I might just swap one and see if that fixes it.
The following users liked this post:
dean6510 (12-25-2013)