2004 XLT 4wd 5.4 Bed Bolt Size and Question
#1
Senior Member
Thread Starter
2004 XLT 4wd 5.4 Bed Bolt Size and Question
I just finished changing out the sway bar links and got to thinking about the strange vibration I've been getting in the back end. I've changed out most of the driveline stuff (I've posted on this before) but I got to looking at the bed bolts.
Am I right in that there are 3 on each side holding the bed to the frame? 3 of them have no nuts on them just the threaded bolt coming through the mount. Are all of them supposed to have bolts and if so, what size and torque? Should I just change the mounts out and put on new bolts? Anyone have a link to some that I can look at to get the right thing in my head before shopping?
Thanks
Am I right in that there are 3 on each side holding the bed to the frame? 3 of them have no nuts on them just the threaded bolt coming through the mount. Are all of them supposed to have bolts and if so, what size and torque? Should I just change the mounts out and put on new bolts? Anyone have a link to some that I can look at to get the right thing in my head before shopping?
Thanks
#2
Mark
iTrader: (1)
post up some pics of what you are looking at...