2004 uneven front left to right after strut change
06-30-2014, 02:29 PM
#11
Junior Member
Thread Starter
Join Date: Jun 2014
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
After reading the everyone's post, I started checking the torque on all the parts again. In the process of confirming all the torque specs, I found the sway bar linkage was broken. As in no longer attached to the right side. I knew I should have replaced the linkage also. I will replace the linkage on both sides tonight and see how this goes. Do I need to let the truck settle before getting it aligned? I was going to get the truck aligned today but saw it was not level last night so I post phoned the alignment.
06-30-2014, 10:40 PM
#12
Junior Member
Thread Starter
Join Date: Jun 2014
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Thank you to everyone for your help. I installed new sway bar linkages and the truck is now sitting level. I believe the truck looks a lot better with the new quick lift shocks. I just hope the camber can be adjusted enough to get it in spec.
