'04 - '08 Truck Picture Thread...
TOTM November 2019
iTrader: (2)
I went to Home Depot and they have rolls of brown paper in the painting supplies, I just used a ton of that and painters tape and left them on, all except the 9 inch oval that I painted and cleared. I had that oval from years ago that I had sanded the script down on to make the oval perfectly smooth. When I redo them in the spring, they will all be pulled off. I may even buy 2 of the tailgate F150 badges that are on the lower left and use them on the fenders. Hate the little lip that has 5.4 on it.
Senior Member
I went to Home Depot and they have rolls of brown paper in the painting supplies, I just used a ton of that and painters tape and left them on, all except the 9 inch oval that I painted and cleared. I had that oval from years ago that I had sanded the script down on to make the oval perfectly smooth. When I redo them in the spring, they will all be pulled off. I may even buy 2 of the tailgate F150 badges that are on the lower left and use them on the fenders. Hate the little lip that has 5.4 on it.
Thx for the info
Senior Member
Senior Member
TOTM November 2019
iTrader: (2)
I will keep you posted. I just hope the tailgate badge covers the fender holes.
Senior Member
TOTM November 2019
iTrader: (2)
^^^ I just measured, right at 8", er, uh the tailgate and fender badges that is. So yes, no doubt that they will work.
Senior Member
yup, I can't see why they wouldn't fit peg wise. Only difference seems to be the bottom part on the fenders which lists trim level and/or engine depending on truck
Senior Member