FORD-F-150-XTR-Newb

Wondering if anyone knows of some factory grounding bolts for HID relay harness? I would rather not drill any holes in my truck.

caperJ

I popped a fender bolt put the ground in and zipped the bolt back in.

karl contreras

I wired it to my battery

FORD-F-150-XTR-Newb

But you should have 2 ground wires. 1 for each ballast/side and 1 battery positive.

FORD-F-150-XTR-Newb

Did you have to sand any paint for contact? Or just un bolt and re bolt?

nate3420

There is a ground on the drivers side just underneath the headlight like just above where the lower part of the bumper. It is very easy to see once your head light is out on the driver side. It is hard to get to so just loosen enough to put the fork in and tighten it down. There is a heavy ground already there. Then just ground passenger side to the battery

FORD-F-150-XTR-Newb

THANK you I will take a look.

caperJ

Just popped and rebolted all was good. there is little to no paint under the bolt.

karl contreras

Ya, they're both wired to the battery

nate3420

Did you find that ground?