Wheel Spacers.... BFG AT KO
#1
Wheel Spacers.... BFG AT KO
Sorry.... Posted this in the wrong section earlier...
Hey Guys
Would like to run 305/55-20 BFG AT KO on my 2013 4x4 Platinum with stock wheels. Truck is level with 1.5" AS.
Will I have rubbing issues on my UCA with these?
Would I need wheel spacers and if so which ones? If I have to get spacers its going to make those tires look really wide. Wanted to stick around a 33 inch tire with the minimal level kit that I have. could always go to AS 2" level with 3" block?
Anyone have this setup? have seen Nitto but not BFG
I just don't want any rubbing issues.
Thanks
Hey Guys
Would like to run 305/55-20 BFG AT KO on my 2013 4x4 Platinum with stock wheels. Truck is level with 1.5" AS.
Will I have rubbing issues on my UCA with these?
Would I need wheel spacers and if so which ones? If I have to get spacers its going to make those tires look really wide. Wanted to stick around a 33 inch tire with the minimal level kit that I have. could always go to AS 2" level with 3" block?
Anyone have this setup? have seen Nitto but not BFG
I just don't want any rubbing issues.
Thanks
#2
Senior Member
Ever considered downsizing to a 285/55/20? It is 32.5" and 11.7" wide. It clears stock suspension all day long.
#3
I have 275/60-20 Toyo AT2 on it right now... so really don't want to go smaller. Was looking for something a little taller and wider to give it a good aggressive look and stance.
The following users liked this post:
hydro (08-25-2013)
#5
Senior Member
ah..... 2011fx2, then the 305's IS what you need. Sorry I can't answer your questions about those.