Wheel spacer pics/thoughts
#41
Senior Member
Rims: 20" x 10" *44mm offset, 7¼" backspacing - Ford Racing
Tires: 305/50x20 - YOKOHAMA
Adapters: 1¼" - BORA
Tires: 305/50x20 - YOKOHAMA
Adapters: 1¼" - BORA
#42
Member
The following users liked this post:
lusanchez (09-05-2017)
#45
Don't mean to butt in but I just found an old post of his a few days ago about trimming with his new 35x12.5 and the spacers... his response was:
"I did have to trim the air dam and pull back the lower rear part of the fender liners with zip ties to clear with the spacers."
Just figured I could answer your question since he hadn't responded yet
#46
Senior Member
I have been running hub centric spacers on my truck for 50k miles with no issues. I went with 1.25 inch and running the stock FX4 wheels on 275/60/r20's. I love the stance they gave my truck! Just got some new Falken Wildpeak AT3's so I will try to snap some pics soon and get them up here.
#47
Don't mean to butt in but I just found an old post of his a few days ago about trimming with his new 35x12.5 and the spacers... his response was:
"I did have to trim the air dam and pull back the lower rear part of the fender liners with zip ties to clear with the spacers."
Just figured I could answer your question since he hadn't responded yet
"I did have to trim the air dam and pull back the lower rear part of the fender liners with zip ties to clear with the spacers."
Just figured I could answer your question since he hadn't responded yet
The following users liked this post:
lusanchez (09-06-2017)