Wheel locking traction control issue?
#1
Wheel locking traction control issue?
Have 09 xlt 4x4 with 2,5 front level and 295/70/18 on stock wheels. Every time I take a turn at a decent speed or a on/off ramp I get traction control sign on dash and the wheel locks as if I am sliding, anyone experience this and why?
#2
'11 FX4 SCREW 5.ohh!
I've never had that in my '11, the only thing I've had is regular traction control, and reduction of power during snowy conditions. Much more fun to turn it off when it's safe.
Some information can be found here:
http://media.ford.com/article_displa...ticle_id=20679
It doesn't really answer your question though.
Some information can be found here:
http://media.ford.com/article_displa...ticle_id=20679
It doesn't really answer your question though.
#4
You’ve got larger than stock tires. On a turn, one wheel is turning way faster than the computer expects so it thinks something is wrong. I’m assuming that you haven’t updated the computer for larger tires.
#5
'11 FX4 SCREW 5.ohh!
From the 2009 manual:
WARNING: Vehicle modifications involving braking system,
aftermarket roof racks, suspension, steering system, tire
construction and/or wheel/tire size may change the handling
characteristics of the vehicle and may adversely affect the the
performance of the AdvanceTrac with RSC system. In addition,
installing any stereo loudspeakers may interfere with and adversely
affect the AdvanceTrac with RSC system. Install any aftermarket
stereo loudspeaker as far as possible from the front center console, the
tunnel, and the front seats in order to minimize the risk of interfering
with the AdvanceTrac with RSC sensors. Reducing the effectiveness
of the AdvanceTrac with RSC system could lead to an increased risk
of loss of vehicle control, vehicle rollover, personal injury and death.
Also found this by searching google, and looking at some other forums:
WARNING: Vehicle modifications involving braking system,
aftermarket roof racks, suspension, steering system, tire
construction and/or wheel/tire size may change the handling
characteristics of the vehicle and may adversely affect the the
performance of the AdvanceTrac with RSC system. In addition,
installing any stereo loudspeakers may interfere with and adversely
affect the AdvanceTrac with RSC system. Install any aftermarket
stereo loudspeaker as far as possible from the front center console, the
tunnel, and the front seats in order to minimize the risk of interfering
with the AdvanceTrac with RSC sensors. Reducing the effectiveness
of the AdvanceTrac with RSC system could lead to an increased risk
of loss of vehicle control, vehicle rollover, personal injury and death.
Also found this by searching google, and looking at some other forums:
I noticed the TSB system above did not have the 2011 TSBs yet. So here is the current list.
Technical Service Bulletins
2011 F-150 - US (English)
The Technical Service Bulletins (TSB's) listed here may NOT apply to the vehicle you are working on. You MUST run OASIS with a specific VIN and Symptom Code to determine if it applies. If OASIS does not return the TSB, then it does NOT apply.
11-5-9 - 3.5L GTDI OIL FILTER FL-2055 DISCONTINUED - REPLACED BY FL-500-S
ACTION:Use Motorcraft FL-500-S on all 2011 F-150 vehicles equipped with a 3.5L GTDI.
11-5-7 - RAPTOR - DRIVELINE CLUNK OR CHIRP/SLIP/BUMP ON ACCEL OR STOP - BUILT ON OR BEFORE 03/12/2011
ACTION: Install the updated driveshaft assembly.
11-4-14 - IKT OR IA - INABILITY TO UNLOCK DOOR - POSSIBLY INTERMITTENT - BUILT BETWEEN 7/1/2010 AND 1/26/2011
ACTION:Follow the Service Procedure to correct the condition of the TPM module.
11-4-13 - MIL (check engine light) ON WITH DTC P2610 or P0711 - BUILT ON OR BEFORE 4/01/2011
ACTION:Reprogram the Powertrain Control Module (PCM) to the latest calibration using IDS release 72.02 and higher.
11-4-11 - TAILGATE APPLIQUE SEPARATION
ACTION:Follow the Service Procedure steps to uninstall then reattach applique.
11-4-7 - TRAC CONTROL FLASHING / ILLUMINATED WITH DTCs C1278, C1280, C1282 AND C1963
ACTION:Reprogram the ABS module to the latest calibration using IDS release 72.01 and higher.
11-4-4 - 3.7L WITH 6R80 TRANSMISSION - BUILT FROM 11/1/2010 TO 11/30/2010 - DTC P0741
ACTION:Follow the Service Procedure steps to correct the condition.
11-3-13 - OUTSIDE AIR TEMPERATURE DISPLAY INACCURATE / INCORRECT REMOTE START CLIMATE CONTROL OPERATION WHEN SET TO AUTO FUNCTION - BUILT ON OR BEFORE 1/6/2011
ACTION: If no DTCs, Reprogram the HVAC module to the latest calibration using IDS release 71.04 and higher or 72.01 and higher.
11-3-8 - 6R80 TRANSMISSION - EXCESSIVE GEAR SELECTOR EFFORT- COLD CLIMATE CONDITIONS
ACTION: Install a snow shield. Refer to the kit instructions for proper installation.
11-2-6 - UNABLE TO ADJUST COMPASS ZONE
ACTION: Reprogram the Instrument Cluster Module (ICM) to the latest calibration using IDS release 71.02A and higher.
Technical Service Bulletins
2011 F-150 - US (English)
The Technical Service Bulletins (TSB's) listed here may NOT apply to the vehicle you are working on. You MUST run OASIS with a specific VIN and Symptom Code to determine if it applies. If OASIS does not return the TSB, then it does NOT apply.
11-5-9 - 3.5L GTDI OIL FILTER FL-2055 DISCONTINUED - REPLACED BY FL-500-S
ACTION:Use Motorcraft FL-500-S on all 2011 F-150 vehicles equipped with a 3.5L GTDI.
11-5-7 - RAPTOR - DRIVELINE CLUNK OR CHIRP/SLIP/BUMP ON ACCEL OR STOP - BUILT ON OR BEFORE 03/12/2011
ACTION: Install the updated driveshaft assembly.
11-4-14 - IKT OR IA - INABILITY TO UNLOCK DOOR - POSSIBLY INTERMITTENT - BUILT BETWEEN 7/1/2010 AND 1/26/2011
ACTION:Follow the Service Procedure to correct the condition of the TPM module.
11-4-13 - MIL (check engine light) ON WITH DTC P2610 or P0711 - BUILT ON OR BEFORE 4/01/2011
ACTION:Reprogram the Powertrain Control Module (PCM) to the latest calibration using IDS release 72.02 and higher.
11-4-11 - TAILGATE APPLIQUE SEPARATION
ACTION:Follow the Service Procedure steps to uninstall then reattach applique.
11-4-7 - TRAC CONTROL FLASHING / ILLUMINATED WITH DTCs C1278, C1280, C1282 AND C1963
ACTION:Reprogram the ABS module to the latest calibration using IDS release 72.01 and higher.
11-4-4 - 3.7L WITH 6R80 TRANSMISSION - BUILT FROM 11/1/2010 TO 11/30/2010 - DTC P0741
ACTION:Follow the Service Procedure steps to correct the condition.
11-3-13 - OUTSIDE AIR TEMPERATURE DISPLAY INACCURATE / INCORRECT REMOTE START CLIMATE CONTROL OPERATION WHEN SET TO AUTO FUNCTION - BUILT ON OR BEFORE 1/6/2011
ACTION: If no DTCs, Reprogram the HVAC module to the latest calibration using IDS release 71.04 and higher or 72.01 and higher.
11-3-8 - 6R80 TRANSMISSION - EXCESSIVE GEAR SELECTOR EFFORT- COLD CLIMATE CONDITIONS
ACTION: Install a snow shield. Refer to the kit instructions for proper installation.
11-2-6 - UNABLE TO ADJUST COMPASS ZONE
ACTION: Reprogram the Instrument Cluster Module (ICM) to the latest calibration using IDS release 71.02A and higher.