Grandpa's Grocery Getter

Hi Guys, Me again!

For A - 2012 Screw 5.0L / 5.5 box

Im wanting dual Exhaust left and right side, I want magnaflow but my dealer is telling me I can't get it here in Canada, I know you could get it before. I want left and right side because of the rear camera and plus i want to put a larger tire where the spare is. I like the sound of Magnaflow, Im willing to try another exhaust but I want low rumble sound, and it quiet in the Interior.

Does anyone have a Part# for magnaflow duals left and right, for a dealer In canada??

My Dealer can get out back or duals on one side not what i want!
Plus I looking for a Price range of 600-800.00.

Thanks

Grant

jt16xlt

It is Magnaflow part# 15460

Here:

http://www.autoanything.com/exhausts...0A3738291.aspx

The Machinist

Solo Performance Mach X

I installed this system a couple weeks ago, and am quite happy with it. It sells for $746 US. As far as a larger spare tire, I don't know how much larger you'll actually be able to fit under there.

I have the same truck as you, so here is a pic showing the passenger side clearance with the stock spare:


And here is the driver side clearance:

turnerms98

I got the 18" Magnaflo SI/DO with the resonator delete. Not sure what the part number was off the top of my head, but if I had it to do over again the wife and I both agree that we would've gone with a 16"!!! Price installed was under $400!!!

madmax11

I went with the flowmaster 40 series single in dual out left and right. I left my res in and love the sound. Had a shop here do all the custom pipe work and turned out like the pictures in the post above mine for about $450. I went with stainless rolled tips and couldn't be happier. I bought one of the pre fab kits when I had my 2005 last time and wasn't as pleased with the out come. Took me a little time at a few different shops till I finally found one that didn't just throw crap in for a quick buck and did quality work. Was well worth the time spent in the end. I will post pictures later.

ns_redneck

you can get the rear exit kit. and just add some elbows to turn it out to the side. i have been thinking about doing the same to mine. i run an exhaust shop and haven't seen a magnaflow that has duel out on the sides. i am pretty sure flowmaster does if you wanted to go that route.

Grandpa's Grocery Getter

Thanks,

but that is duals out the back not the side's behind the tires.....

Grandpa's Grocery Getter

Thanks,

I thought of the same thing, so I guess thats what i might have to do!! or I'll see what MBRP has to offer as well

cheers

Grant

Robob

for you truck I show
Flowmaster 817478

MBRP S5234409

All the magnaflows have a note that spare tire has to be removed.

there is also a Dynomax 38514 but i dont reccomend that one, tips look blah

Edit: personally I chose a flowmaster side exit stainless system because their mid pipe has the factory flange on it, so it just bolts in and 2 clamps later your done

jt16xlt

I C, thought that is what you wanted. So then the part number would be 15461 for dual out behind rear tire:

2012V8 5.0L; Extended Cab/Short Bed (78in. Bed)-Crew Cab/Short Bed (67in. Bed)
5 x 8 x 18in. Muffler; 3.0/2.5in. Tubing; 3.5in. Polished Stainless Tip; DUAL SAME SIDE BEHIND PASSENGER REAR TIRECat-Back15461

http://www.autoanything.com/exhausts...0A3738297.aspx

Part # 15101 for dual out in front of rear tire, which I think is coming soon looks like below:

2012V8 5.0L; Extended Cab/Short Bed (78in. Bed)-Crew Cab/Short Bed (67in. Bed)
5 x 8 x 18in. Muffler; 3.0/2.5in. Tubing; 3.5in. Polished Stainless Tip; DUAL SAME SIDE BEFORE PASSENGER REAR TIRECat-Back
COMING SOON15101

If you go to:

http://www.magnaflow.com/02product/s...ayproducts.asp

you can see all configurations with part numbers as well as a quick diagram for exhaust exits.

If you are wanting like 15640 only to the sides just order 15640 and have an exhaust shop do a quick mod on it to your specifications. Hope this helps.