visor upgrade ,powder wire needed , help
Im parting out a wrecked Lariat ,(want to add vanity light and garage door opener to my xlt) (sun visor) wondering if anybody knows if the is a plug under head liner where i can just plug it in or do i have to steal power from cab light. and is it easy to remove head liner. what is a easy way to remove front dome light console
|
Plugs were there on my 14' STX
|
Originally Posted by noboost5.0
(Post 4318541)
Plugs were there on my 14' STX
|
If you have the plug it will be in the hole that the visor mounts to. Remove the visor and dig around, most likely it will be stuffed in the headliner fairly far.
|
I didn't need to remove light. Just for pillar covers and visits and clips.puull outer corner down a few inches.you should see them.they will be taped
|
ok ,, so they should be behind piller covers, I will have a look tonight, thanks
|
Originally Posted by Melect
(Post 4321018)
ok ,, so they should be behind piller covers, I will have a look tonight, thanks
|
Mine was right there at the mount, it's easy.
|
Originally Posted by noboost5.0
(Post 4321123)
No.....but you need to remove the pillar covers to pull the corner of the headliner down,I had to pull mine down about 6" or so to see the plug taped to the headliner,
well , I can/t find mine wire guys , I see the wire harness run to the center top console , one wire branches to the mic and the others seem to run to light , no luck,,, |
Originally Posted by Melect
(Post 4321398)
well , I can/t find mine wire guys , I see the wire harness run to the center top console , one wire branches to the mic and the others seem to run to light , no luck,,,
|
All times are GMT -4. The time now is 02:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands