Underseat storage
#201
Proudly Rockin the XL!
Thanks. You're welcome, happy to help out the community!
The following users liked this post:
F150_Trucking (02-06-2014)
The following 2 users liked this post by Dirtnaprightnow:
12GBMPlatinum (02-04-2014),
EasternAirlineKenny (03-15-2014)
#203
Mr. Umimportant
Looking forward to your template. I'm great at tearing crap up, not so good at making things (save for my kids --- did a great job there).
#204
Junior Member
I'm planning on doing this mod this weekend. For those who carpeted their box: did anyone buy the carpeting online, or did everyone buy theirs at a local autoparts store? I'm sure both routes work, just seeing if anyone had thoughts on what was better pricing or easier to find.
Also, did everyone just make a 90 degree corner in the front or did someone get creative and do an additional piece? I'm debating whether to leave the 90 coner in there, to cut a 45 degree short peice, or to round the cornor after its built (before carpeting).
Sorry if these were already answered, I don't recall how many times I read this thread, and others on this topic.
Also, did everyone just make a 90 degree corner in the front or did someone get creative and do an additional piece? I'm debating whether to leave the 90 coner in there, to cut a 45 degree short peice, or to round the cornor after its built (before carpeting).
Sorry if these were already answered, I don't recall how many times I read this thread, and others on this topic.
#205
Senior Member
I'm planning on doing this mod this weekend. For those who carpeted their box: did anyone buy the carpeting online, or did everyone buy theirs at a local autoparts store? I'm sure both routes work, just seeing if anyone had thoughts on what was better pricing or easier to find.
Also, did everyone just make a 90 degree corner in the front or did someone get creative and do an additional piece? I'm debating whether to leave the 90 coner in there, to cut a 45 degree short peice, or to round the cornor after its built (before carpeting).
Sorry if these were already answered, I don't recall how many times I read this thread, and others on this topic.
Also, did everyone just make a 90 degree corner in the front or did someone get creative and do an additional piece? I'm debating whether to leave the 90 coner in there, to cut a 45 degree short peice, or to round the cornor after its built (before carpeting).
Sorry if these were already answered, I don't recall how many times I read this thread, and others on this topic.
The following users liked this post:
dynamicjohn (02-06-2014)
#206
Junior Member
Templates for Underseat Storage
Will advise as to progress.
#207
Senior Member
I started the design tonight. the provided template didn't work for my 2011 Super Crew Laredo Eco Boost. Same procedure but cardboard needed help from some package tape and extra cardboard. I've got the passenger side done so on to the driver's.
Will advise as to progress.
#208
Junior Member
I have had the truck about two weeks now and used the SCab templates as a starting point and they worked out great. Thanks for everyone's help. The carpet from AutoZone matched perfectly. I only get 2/3 under seat storage because of the subwoofer, but real happy with the way it turned out. Now time to vacuum out the saw dust from test fitting.