Topic Sponsor
2009 - 2014 Ford F150 General discussion on 2009 - 2014 Ford F150 truck.
Sponsored by:
Sponsored by:

undercarraige rust, treatment/prevention

Thread Tools
 
Search this Thread
 
Old 09-30-2013, 09:43 PM
  #11  
Senior Member
 
OddBall's Avatar
 
Join Date: Dec 2012
Location: Northern Va.
Posts: 341
Received 60 Likes on 50 Posts

Default

Originally Posted by KevFord1993
I heard putting oil in a spray bottle and firing it all inside the body panels from under the vehicle works alright as well. Anyone else?
We used to do that prior to taking our 4 wheelers out in muddy conditions. It made clean up a breeze but only lasts through 1 washing and thats it. And the nasty side effect is it is an absolute magnet for dust. I mean caked on, sticky dust but it does rinse off easily
Old 10-01-2013, 01:25 AM
  #12  
Junior Member
 
CEHansen's Avatar
 
Join Date: Aug 2013
Posts: 17
Likes: 0
Received 1 Like on 1 Post
Default

I keep posting this but nobody listens. Boeshield T-9.
Old 10-01-2013, 02:28 AM
  #13  
Senior Member
 
Floored150's Avatar
 
Join Date: Aug 2013
Location: California
Posts: 862
Received 85 Likes on 65 Posts
Default

Originally Posted by CEHansen
I keep posting this but nobody listens. Boeshield T-9.
I hear you.

This from their site. Its worth a look see guys....

We feel we have the best product of its type on the market. In fact, if you think you’ve found a better penetrating lubricant and protectant, let us know, and we will refund your purchase price.


® Trademark and Technology owned and licensed by
THE BOEING COMPANY
Old 10-01-2013, 07:28 AM
  #14  
V-8 Sounds Great
 
boosted150's Avatar
 
Join Date: Jun 2011
Location: Anchorage, Alaska
Posts: 518
Received 111 Likes on 38 Posts

Default

I'm from Northern Wisconsin, and I can tell you all about the winter salt and car cancer. I've gone to using grease. I used (2) 5lb tubs of grease, put some gloves on, and smeared it all along the under carriage of the truck. I even reached up along the body panels (like the fenders and truck box) and spread it up there. The truck smelled horrible for about 2 weeks, but 2 years later, I have no rust. You just have to remember that if you need to work on anything, just get some engine cleaner, spray, and clean off the grease before you work on anything or you'll get real dirty in a hurry. The last vehicle I did this to was a 1999 Saab, and sold it in 2010 with zero rust. That car spent 100% of its life in the Wisconsin salt belt.

Oh, and did I mention cost... $20 total.

http://www.autozone.com/autozone/acc...er=373230_0_0_

Last edited by boosted150; 10-01-2013 at 07:31 AM.
Old 10-01-2013, 08:42 AM
  #15  
Senior Member
 
Old Smoky's Avatar
 
Join Date: Oct 2012
Posts: 1,362
Received 233 Likes on 158 Posts

Default

I have the Boeshield T-9. That stuff is ok for bolts but it leaves a yellow waxy deposit behind. Wouldn't be practical to spray the whole underneath of a vehicle with it IMO.
Old 10-01-2013, 09:07 AM
  #16  
One Bad MoFoMoCo Owner
 
sullyman's Avatar
 
Join Date: Jul 2012
Location: Texas Hill Country
Posts: 2,616
Received 394 Likes on 259 Posts

Default

I will reiterate, Boiled Linseed Oil.

If it works on vehicles on that are constantly on the beach, it will work anywhere. It's cheap. It's environmentally neutral, it's easy, it doesn't stink.

Would recommended spraying it in any holes you find in the frames.

I put at least 20,000 miles on my Dodge on the beach, and at 160,000 miles, it had no worse than a little surface rust in a few spots on the undercarriage. For a Dodge that was a decade old, that's amazing.
Old 04-25-2015, 04:02 PM
  #17  
Junior Member
 
SkiTower's Avatar
 
Join Date: Apr 2015
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by sullyman
I will reiterate, Boiled Linseed Oil.

If it works on vehicles on that are constantly on the beach, it will work anywhere. It's cheap. It's environmentally neutral, it's easy, it doesn't stink.

Would recommended spraying it in any holes you find in the frames.

I put at least 20,000 miles on my Dodge on the beach, and at 160,000 miles, it had no worse than a little surface rust in a few spots on the undercarriage. For a Dodge that was a decade old, that's amazing.


Are you suggesting this for a treatment or prevention? I just purchased a '79 F150 and it has what appears a little surface rust throughout the underside. I would like to clean it up if possible. I like that this sounds environmentally friendly, but want to be clear on if it's a treatment or prevention. I need a treatment at this point. A buddy has recommended POR-15, but that's going to be a LOT of work to clean and expensive to do the entire underside. It's probably worth it but I want to make sure there isn't an alternative (new to vehicle restorations).
Old 04-25-2015, 04:39 PM
  #18  
Cowboy of the Skies
 
WestsydeGuy's Avatar
 
Join Date: Apr 2015
Location: B.C. Canada
Posts: 964
Received 167 Likes on 134 Posts
Default

Originally Posted by sullyman
Boiled linseed oil.

I grew up on the coast, driving the beaches daily. This is what guys who regularly hit the beach do. But you a pump sprayer, park in the yard, or lay out newspapers in the driveway, and spray it on everything under your truck. Because of frequency on the beach, we all reapplied yearly. For everyday driving, you should get a few years out of an application.

You can get it at Home Depot.
Thank you for the tip!!!
Old 04-25-2015, 06:10 PM
  #19  
Senior Member
 
Heel70's Avatar
 
Join Date: Apr 2014
Location: NC
Posts: 645
Received 67 Likes on 63 Posts
Default

Originally Posted by sullyman
I will reiterate, Boiled Linseed Oil.

If it works on vehicles on that are constantly on the beach, it will work anywhere. It's cheap. It's environmentally neutral, it's easy, it doesn't stink.

Would recommended spraying it in any holes you find in the frames.

I put at least 20,000 miles on my Dodge on the beach, and at 160,000 miles, it had no worse than a little surface rust in a few spots on the undercarriage. For a Dodge that was a decade old, that's amazing.
How often should you apply...interested in trying this & the method for boiling?
Old 04-26-2015, 06:34 AM
  #20  
Senior Member
 
winchested's Avatar
 
Join Date: Sep 2014
Location: Southern Ontario, Canada
Posts: 1,848
Received 254 Likes on 210 Posts

Default

Originally Posted by Heel70
How often should you apply...interested in trying this & the method for boiling?
The oil has already been boiled. You use as is or mix with curing agents.

Use it on gun stocks and wood to keep weatherproof.


Quick Reply: undercarraige rust, treatment/prevention



All times are GMT -4. The time now is 06:47 PM.