trucks with toppers pics!!
#181
Thanks for the info. That's good stuff to consider. I'm happy to hear 1 quart of each is enough.
I picked up the topper last night. Temps were right around 0 so I wasn't able to get the truck washed. The difference will be definitely be noticeable once it's clean. Looking forward to 40 degrees this week to get it cleaned up.
I picked up the topper last night. Temps were right around 0 so I wasn't able to get the truck washed. The difference will be definitely be noticeable once it's clean. Looking forward to 40 degrees this week to get it cleaned up.
Looks good, ARE top? If it is, you can email ARE to get replacement badges for the sides. Those windows come right out after removing the screws, just be sure to have someone at the ready to hold them in case the seals are loose. Mine were stuck tight, so I was able to remove the ring, and then walk around and pry them off. I even got the front one out while still on the truck. The door comes off easily too, just remove one screw from the top rail, the rubber plug, lift it up and slide it out the side. I left the frame on since it has 4 rivets securing it at the bottom, but painted it as well so it blended in nicely.
The following users liked this post:
jd_02 (02-14-2016)
The following users liked this post:
f150dave2002 (02-18-2016)
#183
Looks good, ARE top? If it is, you can email ARE to get replacement badges for the sides. Those windows come right out after removing the screws, just be sure to have someone at the ready to hold them in case the seals are loose. Mine were stuck tight, so I was able to remove the ring, and then walk around and pry them off. I even got the front one out while still on the truck. The door comes off easily too, just remove one screw from the top rail, the rubber plug, lift it up and slide it out the side. I left the frame on since it has 4 rivets securing it at the bottom, but painted it as well so it blended in nicely.
I hope your truck fix is going well. A pheasant shattered my grille about 2 weeks after I bought mine (used) but that's the worst I've had to deal with.
Nice looking truck...that's a great color
#184
Senior Member
The following users liked this post:
darrylgibbs (02-15-2016)
#186
When I get mine back from the body shop, hopefully it will be fully washed so I can get a good picture of it. I can never keep it clean enough to take a good photo of it with the topper since I painted it.
#188
Senior Member
Get my Z series installed in the AM! Just took off my Bakflip G2 getting it ready!