Transmission Line Removal
#1
Senior Member
Thread Starter
Transmission Line Removal
Just a quick question here.. I'm wondering about disconnecting the transmission cooler lines at the tranny, not at the radiator/cooler. This is on a 2009 with the 6R80 transmission. There are two lines going in, with a 1 bolt bracket holding them both in. Logically I can visualize they likely just pop out. But I'm hoping to hear from someone whose done it just to confirm. I'm having to repair the lines at the 3rd bend and I'm doing this outside, in the elements in the snow.. so I don;t want to make life worse right now if there's some unknown *gotcha* when doing this.
Thanks!
Thanks!
#2
Senior Member
Thread Starter
OK nevermind people. I went ahead and removed it, they come out together which was not helpful. Had to pry off one retainer, but the double O-rings on each insert looked good so should be a snap re-installing.