Topic Sponsor
2009 - 2014 Ford F150 General discussion on 2009 - 2014 Ford F150 truck.
Sponsored by:
Sponsored by:

Transmission issue?

Thread Tools
 
Search this Thread
 
Old Sep 16, 2023 | 11:09 PM
  #1  
mikejeft1996's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2017
Posts: 17
Likes: 5
Default Transmission issue?

I have a 12 f150 with the 5.0. Truck just threw a wrench and Speedometer went to 0 and it was stuck in 5th, No manual mode, goes to reverse but in drive it only goes in 5th. I pulled over let it sit for a bit and then everything went back to normal. I hadn’t changed the transmission fluid (since it’s “lifetime”). I’m thinking I have a bad speed sensor. Is it worth changing my transmission fluid? I have 178k on the odometer. Any other suggestion that I should look at besides the speed sensor? I noticed when downshifting it either stays in 3rd or downshift to 1st. I can’t seem to take off in second from a roll. But when it shifts in to and out of 2nd just fine. Today was the first time it’s doing this. Please help! Thank you in advance
Reply
Old Sep 17, 2023 | 02:08 AM
  #2  
Go-C's Avatar
Senior Member
5 Year Member
Liked
Loved
 
Joined: Jul 2020
Posts: 130
Likes: 66
From: Florida
Default

Research LEAD FRAME.

That what it sounds like it wrong with your transmission.
Reply
Old Sep 17, 2023 | 07:52 AM
  #3  
2008__XL's Avatar
Community Team
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jun 2016
Posts: 8,912
Likes: 7,446
From: Vermont
Default

You need a new lead frame. Changing fluid more often can help since the lead frame gets contaminated with fine particles.
Reply
Old Sep 17, 2023 | 07:57 AM
  #4  
digitaltrucker's Avatar
Senior Member
10 Year Member
Community Builder
Community Influencer
Active Streak: 30 Days
 
Joined: Dec 2011
Posts: 13,811
Likes: 3,181
From: Texas
Default

Reply
Old Oct 5, 2023 | 12:20 AM
  #5  
mikejeft1996's Avatar
Thread Starter
Junior Member
 
Joined: Jul 2017
Posts: 17
Likes: 5
Default

Originally Posted by digitaltrucker
I’ve replaced the lead frame, and did a service on the transmission but I am still skipping second when downshifting. Just then installed while parking. I’ve replaced the fuse 27 and cleaned the MAF recently. Anyone has any idea if these issues are related or not? Secondly anyone has an idea how much a trans rebuild cost?
Reply




All times are GMT -4. The time now is 08:44 PM.