Train horn help
#1
Train horn help
Okay so I just finished installing an air compressor, tank, and horn. I can't get the compressor to even come on. Anyone have any ideas? I followed the wiring diagram to a tee
#2
1. You wired it wrong
2. Bad relay
3. Blown fuse
4. Bad pressure switch
4. Bad compressor
Just run a temporary hot wire from the battery to the compressor and take the ground to frame,etc. Should work direct. If not, bad compressor.
2. Bad relay
3. Blown fuse
4. Bad pressure switch
4. Bad compressor
Just run a temporary hot wire from the battery to the compressor and take the ground to frame,etc. Should work direct. If not, bad compressor.
The following 5 users liked this post by hkmp5s:
BCMIF150 (02-16-2016),
cholywell (02-16-2016),
RES4CUE (02-16-2016),
sigma pi (02-16-2016),
stevebass4 (02-16-2016)
#5
The following 3 users liked this post by collinmassarek:
#7
Senior Member
Trending Topics
#9
Texas A&M Aggie
Y'all, if you don't have help to give then move along. OP was not asking for your opinions on the train horn, and I'm sure he doesn't care. He's asking for help wiring a compressor, so provide help if you can or move on. There's no reason to berate someone on the internet just because they're doing something that you wouldn't do.
OP, are you sure you have it properly grounded? Without a good ground it won't even attempt to turn on.
OP, are you sure you have it properly grounded? Without a good ground it won't even attempt to turn on.
The following 2 users liked this post by tareed94:
darrylgibbs (02-16-2016),
Live4Him (02-16-2016)