Too much FX2 rake but;
#1
Member
Thread Starter
Too much FX2 rake but;
Too much rake but don't want to end up
with the "PRE RUNNER" rear drop, when i
am haulin heavy loads or trailers..........
I wonder how much should i lift the front?
FX2 SCREW 5.0, 3.55.OX
with the "PRE RUNNER" rear drop, when i
am haulin heavy loads or trailers..........
I wonder how much should i lift the front?
FX2 SCREW 5.0, 3.55.OX
#2
Beating Dead horse and all but ....
I lifted my front 2.5" and the rear 1.5". That spec gets you to leveled 4x4 height, and retains about half of the factory rake.
You could just lift the front 1-1.5" and see how you like that as well if you are a MPG monger.
I lifted my front 2.5" and the rear 1.5". That spec gets you to leveled 4x4 height, and retains about half of the factory rake.
You could just lift the front 1-1.5" and see how you like that as well if you are a MPG monger.
#3
#4
Member
Thread Starter
dunno Lasso
There is a clear difference in your rear tire to
wheel well distance, as our pics are similar,
size. I dunno about the suspension dif between
a FX2 v Lariat. I'll have to keep reading......
thx
wheel well distance, as our pics are similar,
size. I dunno about the suspension dif between
a FX2 v Lariat. I'll have to keep reading......
thx
#5
I just bought my FX2 Sport and it looks just like yours! I was very dissapointed in the look so I tried to make some exterior visual modifications. I took the running boards off and the air dam in the front off. It made it look a little better but I definantly want to add a 1.5" front lift. I've been looking at the supension blocks that you just bolt on and it seems to give the desired effect. If you want I can try and post some pics later...?
#6
Member
Thread Starter
yea rshaw
I would like to take the running boards off my truck,
but the ole lady willnot bee too happy. Im 6'2 and
i still have to make an effort to climb in and step out.
Post pics rshaw, if you have them. lemme look.....
Im thinking, go with superccs, and raise the front a little.
thx
but the ole lady willnot bee too happy. Im 6'2 and
i still have to make an effort to climb in and step out.
Post pics rshaw, if you have them. lemme look.....
Im thinking, go with superccs, and raise the front a little.
thx
#7
Senior Member
I know I am surely in the minority here, and I don't mind a leveled truck. But I actually think some rake makes it look better IMHO, it looks tougher, sportier in my mind. Sort of how dragsters are with the smaller wheels in the front. I also tow trailers, and don't like it sagging. Leveled out seems more like a SUV or car to me.
Last edited by elbo; 10-10-2012 at 12:05 AM. Reason: dislexic
Trending Topics
#8
Member
Thread Starter
FX2 RAKE , Says Elbo
Once I thought about it, the FX2 Rake is ok for me.
Here's what I did today. I hitched my tilt trailer"
Loaded my Zero turn Ferris mower@ 1000#. Then
Loaded other gear, blowers,trimmers,tools ect. Then
My hitch height lowered 1.50 inches. Yea that's what
I want a truck to do. I'm just prolly 'smitten' by my
New truck. It looks good, but it needs to work......
Thanks Elbo, for the reply.
Here's what I did today. I hitched my tilt trailer"
Loaded my Zero turn Ferris mower@ 1000#. Then
Loaded other gear, blowers,trimmers,tools ect. Then
My hitch height lowered 1.50 inches. Yea that's what
I want a truck to do. I'm just prolly 'smitten' by my
New truck. It looks good, but it needs to work......
Thanks Elbo, for the reply.
#9
Senior Member
The suspension may be a little different. If you have a higher tow rating, the factory may have installed a different rear springs. Thats my guess.