Tire and Wheel Fitment Guide - 2009 and newer
#2791
I got a 13 4x4 with the rough country 2.5front 1back kit with 33x12.5 or 305/55/20 and my rim is 8.5 offset and I had a little trimming on my front wheel well in the plastic both front and back. With that setup my tires stick out about an inch and I glad I went with that setup because I for like it sticking out to far either.
The following users liked this post:
R8ter87 (05-07-2014)
#2795
Senior Member
Good Day Gents,
Been reading along this thread insanely, and I finally got some rims today!! I'm still not too sure about lifting the truck yet, any of you could confirm for me if my setup would work?
Truck: 2013 FX4 SCREW (No lifts)
Wheels: 20 X 9 (+18 offset)
Tires: 285/60/20 DuraTrac
Will I rub? I think this is the biggest I can go without rubbing?
Thanks guys!
Been reading along this thread insanely, and I finally got some rims today!! I'm still not too sure about lifting the truck yet, any of you could confirm for me if my setup would work?
Truck: 2013 FX4 SCREW (No lifts)
Wheels: 20 X 9 (+18 offset)
Tires: 285/60/20 DuraTrac
Will I rub? I think this is the biggest I can go without rubbing?
Thanks guys!
#2796
I have an 09 Supercrew 2wd. I'm putting a 2.25" leveling kit and BF Goodrich AT 275/70/18 on my factory rims. My only question is aesthetics. Should I go with white lettering or black lettering? My truck is light beige.
#2797
Q: largest tire you can fit on the stock 2013 XTR 18" rims? 4x4, and I don't want to level it. Just largest width & height please!
#2798
Senior Member
Need some help on what size tires and rims I should get.....
I'm getting the Rancho quicklifts put on Monday and need help with ::
1. Do I need an alignment after it's done.
2. Will this tire and rim combo work , 18X9 -12 offset Ballistic Jesters on 295/65R18 Goodyear Duratracs fit without any rubbing or cutting. I want to get the rim and tires on before the end of the year .Thanks
How for out will they stick out.
I'm getting the Rancho quicklifts put on Monday and need help with ::
1. Do I need an alignment after it's done.
2. Will this tire and rim combo work , 18X9 -12 offset Ballistic Jesters on 295/65R18 Goodyear Duratracs fit without any rubbing or cutting. I want to get the rim and tires on before the end of the year .Thanks
How for out will they stick out.
#2799
Junior Member
newbie tire question
Hey guys,
I'm not very mechanically inclined at all and want to put some bigger tires on my truck within the next few months, as I will need new ones. I want to put 33's on my truck, but don't want to do a level. I have read that you can put 33's on stock height, just wondering if anyone here has done so, and exactly what size and tire are you running? I have 17 inch rims, if that helps. Thanks very much.
I'm not very mechanically inclined at all and want to put some bigger tires on my truck within the next few months, as I will need new ones. I want to put 33's on my truck, but don't want to do a level. I have read that you can put 33's on stock height, just wondering if anyone here has done so, and exactly what size and tire are you running? I have 17 inch rims, if that helps. Thanks very much.
#2800
Member
I have a 2013 F150 STX 4x4 with a 2" Hell Bent Steel leveling kit and just put 285/65/18 Firestone Destination M/T's mounted on 18X9 Level 8 Strike 6 wheels with +25 offset (6" backspacing). Could have gone bigger but there is no rubbing, didn't kill my gas mileage and I think they look pretty good.
Last edited by troylee72; 12-22-2013 at 12:03 PM.
The following users liked this post:
Joel_980 (12-22-2013)