PawPaw

Look at the BFG 305x65x18 TA/KO's, they are close to 34 inches tall and will fit on the stock wheel's.

dootech

22x9.5 xd monsters +35 offset (6.13" backspace)
325/50R22 nitto trail grapplers

slight rubbing on the sway bar at full lock.
rubbing on lower front valance in reverse while steering, i'll have to trim that a bit.

these iphone pics don't do justice to how it looks in person, so i'll try to get some real camera pics up in a couple days.

jgut12

Looks good dootech... whats your level/lift?

dootech

2.5" front level, 3" block in rear

2011 platinum

I am thinking about getting general grabber A/T in 305/50r20 I have a stock 2011 F150 platinum with no level or lift. Does anyone know if these will fit with no rubbing.

Woo Sah

Depends on the rim offset and if you are a 4x4. The rims I want are on a two week back order then I should be throwing them on. I am going with 305/50-20. More than
likely the Zeon. I'll post up when I do.

2011 platinum

Ok thanks Im gonna keep the stock rims and its a 4x4

Woo Sah

They will fit. PawPaw has a 305/55 setup with stock and no rub.

BC's2011fx4

I've got my 11 fx4 with a 2.5 rough country leveling kit and 305/55/20 bf goodrich all terrains... Ken towery said they rub the control arm at full lock... Ive yet to see this, prolly mad i didnt buy the tires from them...love this setup, rides better imo since i added the tires (had level for a bit b4 tires installed)

PawPaw

Look's great from what I can see. How about a few more pics. My Nitto's are real close on the inside but have yet to rub.