Tire and Wheel Fitment Guide - 2009 and newer
#2303
I looked through this thread constantly. I found a few good ideas of what my truck would look like, although the majority either had 20's, was a crew cab, or had different size tires than what I was wanting. So here is mine that I got done just a couple days ago. The back may look a little low in the pics because my stock wheels and tires are in the back. I'll snap some good photos on a sunny day soon. I am going to have to trim about 1" off the air dam. It only rubs at full lock in reverse. Nothingever rubs going forward or under load.
2011 SCab 4x4 w/ Eco - Readylift 2" Level - 18x9 Moto Metal 961 - 295/70r18 Nitto Trail Grapplers
2011 SCab 4x4 w/ Eco - Readylift 2" Level - 18x9 Moto Metal 961 - 295/70r18 Nitto Trail Grapplers
Last edited by SiiXeR; 05-11-2013 at 12:01 PM. Reason: Photo Link
The following users liked this post:
BC's2011fx4 (05-13-2013)
#2308
Not sure what size to get
I've been reading for days and not sure what to get!!
I have a 2013 FX4 short bed, want to put a 2 or 2.5" AS leveling kit and 18x9 Fuel Kranks for sure. My tire guy is saying go with either the Nitto terra grappler 295/70/18 or 305/65/18 BFG AT's........ I don't want any rubbing or trimming and not loud road noise which is why I'm going with AT's. I want to fill wheel well nicely and don't want tires to stick out past the fender too much, a tiny bit is ok.
Which tires and what offset would you guys suggest, should I put a block in the back?? I want a level look, don't like the rake....
I have a 2013 FX4 short bed, want to put a 2 or 2.5" AS leveling kit and 18x9 Fuel Kranks for sure. My tire guy is saying go with either the Nitto terra grappler 295/70/18 or 305/65/18 BFG AT's........ I don't want any rubbing or trimming and not loud road noise which is why I'm going with AT's. I want to fill wheel well nicely and don't want tires to stick out past the fender too much, a tiny bit is ok.
Which tires and what offset would you guys suggest, should I put a block in the back?? I want a level look, don't like the rake....
#2310
I've been reading for days and not sure what to get!!
I have a 2013 FX4 short bed, want to put a 2 or 2.5" AS leveling kit and 18x9 Fuel Kranks for sure. My tire guy is saying go with either the Nitto terra grappler 295/70/18 or 305/65/18 BFG AT's........ I don't want any rubbing or trimming and not loud road noise which is why I'm going with AT's. I want to fill wheel well nicely and don't want tires to stick out past the fender too much, a tiny bit is ok.
Which tires and what offset would you guys suggest, should I put a block in the back?? I want a level look, don't like the rake....
I have a 2013 FX4 short bed, want to put a 2 or 2.5" AS leveling kit and 18x9 Fuel Kranks for sure. My tire guy is saying go with either the Nitto terra grappler 295/70/18 or 305/65/18 BFG AT's........ I don't want any rubbing or trimming and not loud road noise which is why I'm going with AT's. I want to fill wheel well nicely and don't want tires to stick out past the fender too much, a tiny bit is ok.
Which tires and what offset would you guys suggest, should I put a block in the back?? I want a level look, don't like the rake....