Tire and Wheel Fitment Guide - 2009 and newer
#1611
Senior Member
Considering the Nitto Crosstecks - just can't decide on whether to go with the P-metric 275/65/18 or the 10 ply HD tire 275/65/18. I am leaning towards the 10 ply as I would like a firmer ride and more side stability. I have replaced the stock shocks with Bilstein 4600s and the truck is stock otherwise with no lift or level. Anyone have experence with these tires or any suggestions on the 10 ply? Many thanks
2011 Ecoboost Lariat 4X4 Super Crew
2011 Ecoboost Lariat 4X4 Super Crew
#1612
Thanks to Paxford for starting this thread. 2011 xlt 2wd ecoboost 3:55. Bilstein 5100 in front set at 2" which leveled it then I put readylift 1.5" block in rear with 4wd 5100s. 275 70 17 silent armors on stock wheels. No problems with clearances. Just got raptor wheels with same tires.
The following 2 users liked this post by 11EB:
clarkbre (12-22-2017),
Grandpa's Grocery Getter (09-30-2012)
#1614
5.4 FX2
Originally Posted by the-s
alright, so i just purchased some 2010 kr 20's and need to figure out what size tire to run. I have a 2in level, so do i run 295/55r20's orrr 305/55r20's? Thanks
Last edited by Woo Sah; 08-25-2012 at 01:02 PM.
#1615
Originally Posted by The-S
Alright, so I just purchased some 2010 KR 20's and need to figure out what size tire to run. I have a 2in level, so do I run 295/55r20's ORRR 305/55r20's? Thanks
#1616
Senior Member
Havent found this exact setup, but from all the research i think i should be good. Let me know what yall think. 11 screw 4x4, 2inch AS level, 305/70/17s on 17x9s +25. I dont mind trimming a little if i need to.
The following 3 users liked this post by exponentialpi:
#1618
Senior Member
#1619