Sunglasses Holder Upfitter Panel Idea
The following users liked this post:
jzauringer (08-06-2015)
#32
Senior Member
What gauge and how many leads were there for 6 switches???
#33
Senior Member
iTrader: (1)
Sunglasses Holder Upfitter Panel Idea
Originally Posted by STingray1300
How much room is there along the A-Pillar with the air bag/canopy in there? The dual lighted switches use what, 4 leads each?
What gauge and how many leads were there for 6 switches???
What gauge and how many leads were there for 6 switches???
Using relays lets you keep the gauge small.
The following users liked this post:
STingray1300 (08-04-2015)
#36
American member
Sunglasses Holder Upfitter Panel Idea
I'll have to subscribe. I have the sunglasses holder with a moonroof, but I just don't wear them enough. So making the a nice factory looking mod will be interesting to follow.
#37
Senior Member
#38
Senior Member
iTrader: (1)
Sunglasses Holder Upfitter Panel Idea
Originally Posted by STingray1300
Will some CAT5 work, e.g., or is that too small?
The following users liked this post:
STingray1300 (08-04-2015)
#39
2nd Amendment Supporter!
Originally inspired by: Yellowfinii from a while ago... but unable to put the larger switches in a moonroof equipped truck....
Here is a thread for reference in a 6 switch panel mounted in the headliner.
https://www.f150forum.com/f38/overhe...4/#post4276276
You guys got some great ingenuity, great ideas & skills.... and it definitely helps to influence others!
Here is a thread for reference in a 6 switch panel mounted in the headliner.
https://www.f150forum.com/f38/overhe...4/#post4276276
You guys got some great ingenuity, great ideas & skills.... and it definitely helps to influence others!
#40
Senior Member
Consider this a huge "BUMP"
After over-thinking a number of different ideas, the one in this thread was hands down the best. So, I finally buckled down and finished it:
I am so pleased with the accessibility from the driver's seat.
I ran 7-18ga and 1-14ga wire down the A-pillar, used a Hitachi OEM style connector under the dash, and color coded each circuit. I grounded to the cross bar behind the sunglasses holder (eliminating the need for 1 lead up the A-pillar)
I bought a Ford F350 upfitter switch set - $75. If someone wants it, along with the wiring diagram, PM me ($60 shipped to lower 48)
If anyone is wondering if it's worth it, let me assure you, it IS! Go for it!
After over-thinking a number of different ideas, the one in this thread was hands down the best. So, I finally buckled down and finished it:
I am so pleased with the accessibility from the driver's seat.
I ran 7-18ga and 1-14ga wire down the A-pillar, used a Hitachi OEM style connector under the dash, and color coded each circuit. I grounded to the cross bar behind the sunglasses holder (eliminating the need for 1 lead up the A-pillar)
I bought a Ford F350 upfitter switch set - $75. If someone wants it, along with the wiring diagram, PM me ($60 shipped to lower 48)
If anyone is wondering if it's worth it, let me assure you, it IS! Go for it!
The following users liked this post:
akmedic77 (03-29-2016)