Success - SCT Livewire in EDGE Pod
#1
Senior Member
Thread Starter
Success - SCT Livewire in EDGE Pod
#2
Beer Gut Extraordinaire
That looks awesome! My windshield mount for the SCT broke into pieces. How exactly does the unit fasten to the mount?
#3
Senior Member
Thread Starter
To fasten the SCT to the mount to the pod you use an adapter from EDGE and it fit's were the EDGE CS is in the unit above. The EDGE uses the tabs to mount to the pod, but I had to cut these off flush to mount the SCT. I simply used some double stick tape to mount the SCT to the adapter which looks like this;
The nice part about using the adapter is that you can quickly and easily remove the tuner from the pod if you need or want to. In the end if it didn't work satisfactorily all I had to buy was the adapter, but I have had it in for about a month now with temperatures above 90 F the last week with no problems.
Last edited by DeereGeff; 07-08-2013 at 10:39 PM.
The following 2 users liked this post by DeereGeff:
HCFX2013 (07-08-2013),
StrawHatShinobi (07-08-2013)
#6
Senior Member
Thread Starter
Trending Topics
#8
Senior Member
TTT for mount ideas...
#9
Junior Member
Is there anyway you could snap a pic of the back of the sct unit to see how exactly it looks where you modded the mount. Love this idea and wanna copy it as Im not a fan of the suction cups