Stock rake on a '13 FX4
#1
Member
Thread Starter
Stock rake on a '13 FX4
So before people crucify me for asking a stupid question, I did try to search for this but several different answers, many just guesses.
Can anybody provide exact measurements or specifications (maybe from Ford) for the rake in a stock FX4 SCrew EB?
Can anybody provide exact measurements or specifications (maybe from Ford) for the rake in a stock FX4 SCrew EB?
#4
My understanding is the stock rake can vary from truck to truck, but it is approximately 2.5 inches.
#5
Member
Thread Starter
Cool, thanks guys.
#7
Senior Member
I've got a 2013 there's a slight difference from truck to truck I don't have the FX4 as trim levels don't change much. The only real suspension changes are between 4x4 and 4x2
Not sure why people keep bringing up Bilsteins in the thread but since we are I went with Bilsteins at the max setting there is zero rake on the truck now.
Not sure why people keep bringing up Bilsteins in the thread but since we are I went with Bilsteins at the max setting there is zero rake on the truck now.
Trending Topics
#8
Senior Member
Just eyeballing it here, but I've noticed my 2013 FX4 all stock only has a subtle rake compared to earlier years. It seems to be very pronounced in the earlier years.
This is all stock sitting on level ground. I agree it appears there's more space in the rear wheel well, but the overall angle of the rig seems perfectly horizontal.
This is all stock sitting on level ground. I agree it appears there's more space in the rear wheel well, but the overall angle of the rig seems perfectly horizontal.
#9
Senior Member
Exerpted from the 2013 Body Builder Layout Book
F-150 DIMENSIONAL DATA SUPERCREW
156.5" WB
4X4 .....
11.2 - BOTTOM OF FRONT BUMPER VALANCE TO GROUND @ CURB
20.0 - BOTTOM OF REAR BUMPER VALANCE TO GROUND @ CURB
20.0 - BOTTOM OF REAR BUMPER VALANCE TO GROUND @ CURB
#10
Member
Thread Starter