Topic Sponsor
2009 - 2014 Ford F150 General discussion on 2009 - 2014 Ford F150 truck.
Sponsored by:
Sponsored by:

sorry h.i.d again

Thread Tools
 
Search this Thread
 
Old 03-02-2010, 07:58 PM
  #1  
Member
Thread Starter
 
bfavela12's Avatar
 
Join Date: Sep 2009
Posts: 44
Received 0 Likes on 0 Posts

Default sorry h.i.d again

hey guys sorry for this post, but I need help finding the threat about disabling the headlights when unlocking the truck with the alarm, I know I seen it but cant find it, so if one of you guys know the threat please post it, or how can I disable the auto headlamp when unlocking with the alarm thanks...
Old 03-02-2010, 08:03 PM
  #2  
Senior Member
 
JRide's Avatar
 
Join Date: Aug 2009
Location: Windsor CT
Posts: 101
Likes: 0
Received 1 Like on 1 Post

Default

I posted it a while back.

Here you go:

In case anyone is looking for this it is on page 137 in the manual.

1. Turn the ignition to the on position, then press the door unlock button three times.

2. Turn the ignition the the off position, then press the door unlock button three times.

3.Turn the ignition to the on position, the horn will chirp to indicate the driver configuration mode has been activated.

4. Within five seconds, press the door unlock button two times. (Note: One horn chirp should be heard, indicating the system has been disabled. Conversely, a horn chirp followed by a honk will indicate the system is enabled. Pressing the door unlock button two times again will turn the feature on if it was previously off, or off if it was previously on.
Old 03-02-2010, 08:11 PM
  #3  
Senior Member
 
RES4CUE's Avatar
 
Join Date: Feb 2010
Location: Manassas Va
Posts: 9,300
Received 1,523 Likes on 1,203 Posts
Default

https://www.f150forum.com/f7/good-8000k-hid-kit-25754/

should be last page.
Old 03-02-2010, 09:30 PM
  #4  
Member
 
superpoppa's Avatar
 
Join Date: Dec 2009
Posts: 50
Likes: 0
Received 0 Likes on 0 Posts
Default

this is not an issue for 2010 models, unless there is a diff between american and cdn trucks, mine lock/unlocks using signal light flashes, not headlights.

Last edited by superpoppa; 03-03-2010 at 12:46 AM.
Old 03-03-2010, 12:51 PM
  #5  
Senior Member
 
SailorDon's Avatar
 
Join Date: Dec 2009
Location: Republic of Texas
Posts: 1,052
Received 39 Likes on 29 Posts

Default

Originally Posted by superpoppa
this is not an issue for 2010 models, unless there is a diff between american and cdn trucks, mine lock/unlocks using signal light flashes, not headlights.
Same here. No headlight flashes with my 2010 Platinum. Just signal light flash. And maybe cargo light flash.
Old 03-03-2010, 04:47 PM
  #6  
Senior Member
 
JRide's Avatar
 
Join Date: Aug 2009
Location: Windsor CT
Posts: 101
Likes: 0
Received 1 Like on 1 Post

Default

Originally Posted by superpoppa
this is not an issue for 2010 models, unless there is a diff between american and cdn trucks, mine lock/unlocks using signal light flashes, not headlights.
Originally Posted by SailorDon
Same here. No headlight flashes with my 2010 Platinum. Just signal light flash. And maybe cargo light flash.
Well, it is an option that you can turn on and off. Maybe yours came off from the factory? My truck will still use the flashers and the cargo light with the headlight feature turned off.
Old 03-03-2010, 04:56 PM
  #7  
Member
Thread Starter
 
bfavela12's Avatar
 
Join Date: Sep 2009
Posts: 44
Received 0 Likes on 0 Posts

Default

thanks for the post, worked after the second attempt



Quick Reply: sorry h.i.d again



All times are GMT -4. The time now is 03:19 AM.