kevstach

Here is a picture of my 2010.

ImOnOne

PSUcivil

Here is my 2 week old 2013 xlt ecoboost scab. I traded in a 1999 dodge ram 1500. First f150 and love it

MediumPimpin

2012 XLT - was a little dark when I took these and the truck is dirty.

supercrew4x4

Do I already have a level kit y'all think ? I bought one but this sucker is level. If not ima use it as a lift.



And it sits pretty high already

Hobzit

Looks level but in kind of thinking the stock rear block was removed. I'd take a look at where the leaf springs and axle meet and see if there is a one inch block spacer there. Also if it is there then take a look at the top of the front struts and see if you can see a spacer on top of the coil.

supercrew4x4

Um there's something but it don't look like my leveling kit does. I hope it don't. It can clear 35s now

Hobzit

Something where? Up front or in the rear? Up front would also have a factory cap/spacer on top of the coil, but if it's for leveling the. It should be a few inches thick, at least two I'm guessing. But did it have anything in the rear? Stock f150's can squeeze 35's when leveled I believe, I don't know about at stock height

Hobzit

Oh and I have a 6 inch lift and have 35's, so I dont know if you were hinting towards something bigger on your truck but if so if do some more research before going over 35.

supercrew4x4

Yah there's something a couple inches thick ill get pic